DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2007-06-19 11:06:19
- td-dns323
- Member
- Registered: 2007-06-06
- Posts: 25
Has someone made working successfully setacl on DNS-323 ?
I need help on this point.
Thanks.
********************************
2 DNS-323 with 4 Seagate ATA 500 Go 16 Mo cache UDMA-300 7200 rpm Barracuda 7200.10 in Raid 1 -Firmware 1.03
Offline
#2 2007-06-19 12:49:08
- frodo
- Member
- From: Stockholm, Sweden
- Registered: 2007-01-17
- Posts: 259
Re: Has someone made working successfully setacl on DNS-323 ?
What are you looking for?
chattr?
You will have to have telnet access for this... I.e. fun_plug
Offline
#3 2007-06-19 13:14:10
- td-dns323
- Member
- Registered: 2007-06-06
- Posts: 25
Re: Has someone made working successfully setacl on DNS-323 ?
I have installed funplug, with "etch" distribution.
I have created users and groups and when, in telnet i try to use "setfacl" with command "setfacl -m u:myuser_account:rw my_file", i have the following message "my_file: Operation not supported".
I want to use acl because users and groups rights in Web interface are not sufficient.
I think my problem is due to the fact (?) of acl are not implemented on my filesystem ? (i don't kown how to mount it with "acl" option).
I don't know how to use "chattr".
Thanks for all help.
********************************
2 DNS-323 with 4 Seagate ATA 500 Go 16 Mo cache UDMA-300 7200 rpm Barracuda 7200.10 in Raid 1 -Firmware 1.03
Offline
#4 2007-06-19 17:44:45
- td-dns323
- Member
- Registered: 2007-06-06
- Posts: 25
Re: Has someone made working successfully setacl on DNS-323 ?
I've tried "mount --bind $DISK1 etch/$DISK1 -o acl" in fun_plug file.
When i execute "mount" (under busybox3), acl option is displayed.
When i execute "mount" after "./lnx_bin/busybox3 chroot etch", option acl is not displayed.
Thanks for your help.
Last edited by td-dns323 (2007-06-19 17:59:13)
********************************
2 DNS-323 with 4 Seagate ATA 500 Go 16 Mo cache UDMA-300 7200 rpm Barracuda 7200.10 in Raid 1 -Firmware 1.03
Offline
#5 2007-06-20 21:19:37
Re: Has someone made working successfully setacl on DNS-323 ?
ext2/3 ACLs must be compiled in your kernel to make this actually work. I haven't checked DNS-323 kernel config but I am afraid that ACLs is not included.
• DSM-G600 - NetBSD hdd-boot - 80GB Samsung SP0802N
• NSA-220 - Gentoo armv5tel 20110121 hdd-boot - 2x 2TB WD WD20EADS
Offline
#6 2007-06-21 09:26:51
- td-dns323
- Member
- Registered: 2007-06-06
- Posts: 25
Re: Has someone made working successfully setacl on DNS-323 ?
It's now possible to have acl informations in etch chroot (i've pushed /etc/mtab and /etc/fstab).
How to check if DLink kernel is build with acl ?
Thanks.
********************************
2 DNS-323 with 4 Seagate ATA 500 Go 16 Mo cache UDMA-300 7200 rpm Barracuda 7200.10 in Raid 1 -Firmware 1.03
Offline