Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi Folks,
I got troubles trying to use my Samsung SCX-4200 multi-functions printer, which is connected to my DNS-323.
Printing is done without any issue (it worked out-of-the-box) but I'm stuck under heavy troubles trying to use the embedded scanner, using SANEd.
Here is the detailled answer from the command scanimage -L.
Could you help me on this point ? Thanks in advance for any answer.
# scanimage -L
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21
[dll] sane_init/read_dlld: processing /opt/etc/sane.d/dll.d ...
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `xerox_mfp'
[dll] sane_get_devices
[dll] load: searching backend `xerox_mfp' in `/opt/lib/sane'
[dll] load: trying to load `/opt/lib/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/opt/lib/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[sanei_debug] Setting debug level of sanei_usb to 128.
[sanei_usb] sanei_usb_init: marking existing devices
[sanei_usb] sanei_usb_init: Looking for kernel scanner devices
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
[sanei_usb] sanei_usb_init: Looking for libusb devices
usb_set_debug: Setting debugging level to 255 (on)
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_busses: Skipping non bus directory devices
usb_os_find_devices: Found 001 on 002
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found libusb device (0x04e8/0x341b) interface 0 at libusb:001:002
[sanei_usb] store_device: add dn 0 with libusb:001:002
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: found 1 devices
[sanei_usb] sanei_usb_init: device 00 is libusb:001:002
[dll] init: backend `xerox_mfp' is version 1.0.11
[sanei_usb] sanei_usb_find_devices: vendor=0x413c, product=0x5124
[sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x3d5d
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342a
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341b
[sanei_usb] sanei_usb_open: trying to open device `libusb:001:002'
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open: interface nr: 0
[sanei_usb] sanei_usb_open: alt_setting nr: 0
[sanei_usb] sanei_usb_open: endpoint nr: 0
[sanei_usb] sanei_usb_open: direction: 0
[sanei_usb] sanei_usb_open: address: 3 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-out endpoint (address 0x03)
[sanei_usb] sanei_usb_open: endpoint nr: 1
[sanei_usb] sanei_usb_open: direction: 128
[sanei_usb] sanei_usb_open: address: 4 transfertype: 2
[sanei_usb] sanei_usb_open: found bulk-in endpoint (address 0x04)
[sanei_usb] sanei_usb_open: configuration nr: 0
[sanei_usb] sanei_usb_open: interface nr: 1
[sanei_usb] sanei_usb_open: alt_setting nr: 0
[sanei_usb] sanei_usb_open: interface 1 not detected as a scanner by sanei_usb_init, ignoring.
[sanei_usb] sanei_usb_open: opened usb device `libusb:001:002' (*dn=0)
[sanei_usb] sanei_usb_write_bulk: trying to write 4 bytes
[sanei_usb] 000 1B A8 12 00 ....
[sanei_usb] sanei_usb_write_bulk: wanted 4 bytes, wrote 4 bytes
[sanei_usb] sanei_usb_read_bulk: trying to read 1024 bytes
USB error: error reading from bulk endpoint 0x84: Connection timed out
[sanei_usb] sanei_usb_read_bulk: read failed: Connection timed out
[sanei_usb] sanei_usb_close: closing device 0
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341f
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3426
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342b
[sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342e
[sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x4265
[sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x3da4
[dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: finished
Offline