DSM-G600, DNS-3xx and NSA-220 Hack Forum

Can anyone confirm compatibility with FFP0.5, usbmodule, etc?

Thanks D-Link.

I have FFP 0.5 and I'm using a USB flash drive with no problem.  I didn't even have to change any settings.
I don't use any of the media streaming or DLink add on modules so I'm not much of a test for Beta.

Dlink do you have any release notes?

Because this is beta 5? of the new 1.10?

Official beta forum up here : http://forums.dlink.com/index.php?topic=14777.75

Greetings

Last edited by Keon91 (2011-03-03 14:12:31)

Found the release notes:

http://forums.dlink.com/index.php?topic=5485.0

Mine DNS-323 just arrived, I have two Samsung F4's, so I set it up (it's formatting atm), then update to 1.10beta and then format them again and they'll be done properly with the 4k sectors?

Dlink wrote:

Yes.

That's great thanks.

Also when are your forums coming back online (been down all day)?

Last edited by dcx_badass (2011-03-09 20:07:14)

Hi Dlink,

Are Hitachi Deskstar 7K3000 2TB now officially supported?  They're 4K drives and came out last December. The exact model number is:
Vendor      Model     
Hitachi      HDS723020BLA642

The issue I'm having is that when I first put the drive in the NAS, I get the purple light. I was able to format the drive using EXT3 and after rebooting the drive light went back to blue.  During formatting and now when I'm trying to copy data over to the Hitachi drive from my old WD Caviar 500GB drive, the NAS frequently hangs (file copy stops). No web access and no SMB connection either.  I need to manually unplug it and restart the device.

FWIW, the NAS is attached to a Mac running OS X 10.6.6 with a cross-over cable (no router in between) set to 1000 Mbit transfer rate and Jumobframes enabled (MTU 4000).  This configuration has been reliable with the WD drives, only when I put in the Hitachi drive I was starting to have these issues. I've tried both FW 1.08 and 1.10 beta 5. Any ideas?

Thanks!

Keon91 wrote:

Try the new 1.10B5 and format the drives ext3 not ext2, this works for the samsung drives..

Yes, that's what I have.

Just installed this firmware, streams videos to PS3 quite well and funplug going strong.  I was going to install twonky but just gonna stick with this for now.  Awesome to see this released after the product being out for so long!

I  have the same failure: UPNP server does not add new files. The rest of this firmware is running well.

mallfouf wrote:

andrew5368 wrote:

The UPnP server hasn't indexed all my folders. Strange stuff.

It took a bit less than 2 hours to index 120 gigs of old videos i had. But once that was done, i was able to watch most of them through the ps3 without any problems. I'm impressed by this firmware.

Maybe I was asking a bit too much to index around 800gb of videos .. i started it up again and it seems to have got them all this time

rodnah wrote:

does this have the C1 fan problem fixed?

Yes, the fan on my C1 now only comes on when required... silence at last!