Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
Dear all,
I successfully installed fun_plug and optware some time ago.
So I played around a little bit and installed some things, I better not have done.
Now my system is not working correctly anymore.
Additionally it is running out of memory.
e.g. when I log in via putty and ssh, a simple "ls -l" gives me the following error: "ls: can't load library 'libintl.so.3'"
Is it possible to simply remove all installed additional software on my DNS 323, so that I get a "fresh" system again?
Of course it would be great to have all my data afterwards ;-)
Thanks for any help.
Gerhard
Offline
Remove \\Volume_1\fun_plug and reboot and it will run nothing but the bog standard d-link software. If memory is the primary issue that will disable all the fun_plug functionality.
You can then remove the software from disk by deleting the respective directories:
Remove \\Volume_1\ffp to remove fonz fun plug
\\Volume_1\fun_plug.d to remove funplug_manger
\\Volume_1\altf to remove altf
and if I recall \\Volume_1\opt will remove optware
Removing a debian reloaded install is a bit more difficult since it essentially acts like the entire disk is it's own and puts files in a number of directories off the root of the disk.
Offline
Thanks a lot.
I tried it and it worked quite well.
After reinstalling fun_plug, I tried to install alt-f.
But now I get the following error when copying the file "Alt-F-0.1B7.tar" to "/"
write error: No space left on device
"ls -l" on '/" gives:
drwxr-xr-x 2 root root 2048 Apr 21 2011 bin
drwxr-xr-x 2 root root 1024 Apr 19 23:49 default
drwxr-xr-x 3 root root 6144 Apr 19 23:50 dev
drwxr-xr-x 8 root root 2048 Apr 19 23:50 etc
lrwxrwxrwx 1 root root 14 Apr 19 23:50 ffp -> /mnt/HD_a2/ffp
drwxr-xr-x 4 root root 1024 Jun 1 2006 home
-rwx------ 1 root root 4816896 Apr 6 13:03 image.cfs
drwxr-xr-x 3 root root 2048 Apr 21 2011 lib
drwx------ 2 root root 1024 Dec 27 2005 lost+found
drwxr-xr-x 6 root root 1024 Apr 20 2011 mnt
drwxr-xr-x 3 root root 1024 Apr 19 23:49 opt
dr-xr-xr-x 55 root root 0 Jan 1 1970 proc
drwxr-xr-x 2 root root 1024 Dec 27 2005 root
drwxr-xr-x 2 root root 1024 Aug 6 2008 sbin
drwxr-xr-x 6 root root 1024 Feb 13 2006 sys
drwxrwxrwt 3 root root 1024 Apr 20 22:58 tmp
drwxr-xr-x 6 root root 1024 Feb 15 2006 usr
drwxr-xr-x 7 root root 1024 Jul 4 2008 var
drwxr-xr-x 7 root root 1024 Apr 19 23:51 web
-rw-r--r-- 1 root root 116 Dec 27 2005 welcome.msg
And df gives:
Filesystem 1k-blocks Used Available Use% Mounted on
rootfs 9911 9892 0 100% /
/dev/root 9911 9892 0 100% /
/dev/loop0 4736 4736 0 100% /sys/crfs
/dev/md0 1920786672 589917636 1330869036 31% /mnt/HD_a2
/dev/sda4 497861 16000 481861 3% /mnt/HD_a4
/dev/sdb4 497861 20 497841 0% /mnt/HD_b4
How could I increase the free space on "/"?
Thanks in advance and best regards
Gerhard
Offline
"/" is found in the root file system which is an in-memory (ram disk) file system. As you can see from your df output, it is about 10,000 1K blocks.
The bulk of your hard disk is found under /mnt/HD_a2, where you will find more space, which is also persistent. The root in-memory file system is not persistent.
You should copy that tar file to someplace under /mnt/HD_a2, or just leave it there if it already is there. You should be able to install Alt-F without having to copy it to /.
Offline
Now it works fine.
Thanks a lot for all your help.
Gerhard
Offline
Pages: 1