Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I "mistakenly" reset my DNS-323 to factory settings through the web GUI. After it not fixing the initial minor problem, I tried to restore all settings from a backup I had just made prior, which was using 2 drives in Standard mode.
The settings all restored except for the drives as 2 independent volumes. I have removed each drive, and both still contain their separate data, but when both are inserted, the DNS-323 wants to read as a corrupted RAID 1. Thankfully it did not seem to try to automatically rebuild.
I can get fun_plug to boot off USB so I can unmount the RAID, but I cannot get both volumes to mount separately, nor figure out how to trick the DNS-323 into not rebooting into RAID 1 mode without wanting to format the drives. I am using firmware 1.07. Thanks!
Offline