Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hello peeps,
I've bought a second hand DNS-323 and putted 2 HD in (Seagate 2To). Those drives are in Raid 1. I updated the firmware to 1.09 also.
I can access to the nas by FTP or SMB share. I copied the 2 files fun_plug and fun_plug.tgz at the root of volume_1, reboot the beast but nothing happend.
There is no ffp folder, no log files, anything. Any advice ?
Last edited by mrwormo (2011-09-29 13:55:33)
Offline
I've restored factory default settings, formated drives again, and the script still won't run.
I have restart the nas a bunch of times but nothing happens.
Offline
Execute permission?
Correct location?
Correct script name?
Edit the script to ensure the log path exists (or create the path)
Offline
FunFiler wrote:
Execute permission?
Permission is 777 for all the files
FunFiler wrote:
Correct location?
I ve put the two files in Volume_1 folder
FunFiler wrote:
Correct script name?
I didn't change the name of the script (ie fun_plug)
FunFiler wrote:
Edit the script to ensure the log path exists (or create the path)
I'm not sure about the path where the log should go.
# write a log, in case sth goes wrong FFP_LOG=/mnt/HD_a2/ffp.log
Should i change the path ?
Offline
Wait a minute. I rebooted the NAS, a last time, before to go to bed, and... It works. Dunno why, but it s really working now ^^
So i close this topic. Thx for your help funfiler.
Offline