DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2011-11-07 17:14:14

tagore
New member
Registered: 2011-07-27
Posts: 4

DNS323: "HDD[1,2] removed" after 10 min, smbd died

I can access my DNS 323 (FW 1.08, fun-plug 0,5, rsnapshot, anacronism, 2 x JBOD, HDD-Powersave 5 min) only for a few Minutes via Samba.

After that HDD-LEDs change their color to something like purple, there is a log "HDDx Hard Drive Has Removed." and  a growing number of /sys/mtd[1,2]-mounts. I can access the HD-Mounts however from a local shell

smb restart solves the problem of the crashed smbd for the moment but the LED-Color does not change back no normal blue.
I could not get samba to log anything.


Did someone experience similar effects? Would reset to factory do any difference ? Can this be done without reformating the disks?

Any hint would be great.  Can someone explain (sorry for the stupid questions)
- what the mtd-devices are for and
- how a systemservice like samba is started at all by the firmware
- by what condition the LED-Color is changed

Thanks

Offline

 

#2 2011-11-07 17:36:48

FunFiler
Member
Registered: 2010-05-23
Posts: 577

Re: DNS323: "HDD[1,2] removed" after 10 min, smbd died

Purple LED often indicates the root file system (includes /tmp) is full. You may have to reconfigure your apps to use a different path. The internal programs also use /tmp to check the drive status so that is likely why it is reporting a removed drive, since it can't write the file.


3 * (DNS-323 with 2 * 2TB) = 12TB Running FW v1.08 & FFP v0.5
Useful Links: Transmission, Transmission Remote, Automatic

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB