Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Just curious what speeds people get when moving files to the NAS. On my 100mbps router average is 9.5mbps which seems slow. I was hoping somehow to increase my speeds to at least 11MB with my current setup.
I used to get ~10MB before but had to add bitmapping to my RAID as i'm sunning AF 0.1RC1.
Last edited by jebise (2011-11-17 06:04:21)
Offline
Over wifi, using FTP or AFP - I see about ~7MB/sec avg
Wired, using FTP or AFP - I see about 17-20MB/sec avg
Using SFTP dramatically decreases the transfer speed for me - by about 1/2 so I avoid it.
I'm using a gigabit buffalo wzr-hp-g300nh:
http://www.buffalotech.com/products/wir … hp-g300nh/
Offline
I'm doing simple SMB transfers and get ~9.5MB
Offline
Are we talking about MBytes or Mbits? My transfer speeds don't exceed 20Mbits (wireless)
Regards,
Anton
Offline
MB = MBytes and MB = Mbits
Anywho Mega Bytes is what we are talking about.
Last edited by jebise (2011-11-19 06:43:35)
Offline
No RAID, SMB, wired Gigabit connection (No Jumbo packets):
Fri Nov 25 14:07:52 2011 --- CHRIS-PC --- DLink-NAS --- Push --- 5.47 seconds --- 838860800 Bits --- 146.37 MBits/Sec --- 18.29625 MBytes/Sec
Fri Nov 25 14:07:58 2011 --- CHRIS-PC --- DLink-NAS --- Pull --- 5.91 seconds --- 838860800 Bits --- 135.41 MBits/Sec --- 16.92625 MBytes/Sec
Fri Nov 25 14:08:03 2011 --- CHRIS-PC --- DLink-NAS --- Push --- 5.42 seconds --- 838860800 Bits --- 147.66 MBits/Sec --- 18.4575 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Pull --- 5.53 seconds --- 838860800 Bits --- 144.78 MBits/Sec --- 18.0975 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Push Total --- 10.88 seconds --- 147.01 MBits/Sec --- 18.37625 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Pull Total --- 11.43 seconds --- 139.94 MBits/Sec --- 17.4925 MBytes/Sec
Last edited by chriso (2011-11-26 00:11:22)
Offline
chriso wrote:
No RAID, SMB, wired Gigabit connection (No Jumbo packets):
Fri Nov 25 14:07:52 2011 --- CHRIS-PC --- DLink-NAS --- Push --- 5.47 seconds --- 838860800 Bits --- 146.37 MBits/Sec --- 18.29625 MBytes/Sec
Fri Nov 25 14:07:58 2011 --- CHRIS-PC --- DLink-NAS --- Pull --- 5.91 seconds --- 838860800 Bits --- 135.41 MBits/Sec --- 16.92625 MBytes/Sec
Fri Nov 25 14:08:03 2011 --- CHRIS-PC --- DLink-NAS --- Push --- 5.42 seconds --- 838860800 Bits --- 147.66 MBits/Sec --- 18.4575 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Pull --- 5.53 seconds --- 838860800 Bits --- 144.78 MBits/Sec --- 18.0975 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Push Total --- 10.88 seconds --- 147.01 MBits/Sec --- 18.37625 MBytes/Sec
Fri Nov 25 14:08:09 2011 --- CHRIS-PC --- DLink-NAS --- Pull Total --- 11.43 seconds --- 139.94 MBits/Sec --- 17.4925 MBytes/Sec
What firmware? What's your setup? Anything special?
I used to read from the NAS with ~16MB/sec with the latest Dlink firmware and a basic FFP, now with the ALT-F firmware I copy with max 11 MB/sec.
Offline
What firmware? What's your setup? Anything special?
I used to read from the NAS with ~16MB/sec with the latest Dlink firmware and a basic FFP, now with the ALT-F firmware I copy with max 11 MB/sec.
Nothing special(as stated: No RAID, SMB, wired Gigabit connection (No Jumbo packets)). I'm using the standard 1.10 Beta, but my speeds have always been the same on the older version of the firmware. I tried ALT-F at one point (never flashed it), but I don't think I even checked what speeds I got with it.
Last edited by chriso (2011-11-29 02:36:10)
Offline