DSM-G600, DNS-3xx and NSA-220 Hack Forum

Ok but I don't know how to "adding it to the linker command line". What does it mean ?

@R0b1n: Open the Makefile. There is a variable defined (maybe CFLAGS), which contains among other things the options -lxml2 and -lsigc-2.0 (to link libxml2 and libsigc-2.0). Add -lcrypto to this line, and run make again.

@DiskCrasher: Does it need to open port 49152? Have a look with 'netstat -ltnp' to see which port(s) mediatomb has opened, or just run 'mediatomb' on the commandline to see it's run messages.

The most interesting part is left away when starting mediatomb as service:

sh-4.1$ mediatomb

MediaTomb UPnP Server version 0.12.1 - http://mediatomb.cc/

===============================================================================
Copyright 2005-2010 Gena Batsyan, Sergey Bostandzhyan, Leonhard Wimmer.
MediaTomb is free software, covered by the GNU General Public License version 2

2012-02-20 08:13:17    INFO: Loading configuration from: /home/Mijzelf/.mediatomb/config.xml
2012-02-20 08:13:17    INFO: Checking configuration...
2012-02-20 08:13:17    INFO: Setting filesystem import charset to ASCII
2012-02-20 08:13:17    INFO: Setting metadata import charset to ASCII
2012-02-20 08:13:17    INFO: Setting playlist charset to ASCII
2012-02-20 08:13:17 WARNING: You enabled the YouTube feature, which allows you
                             to watch YouTube videos on your UPnP device!
                             Please check http://www.youtube.com/t/terms
                             By using this feature you may be violating YouTube
                             service terms and conditions!

2012-02-20 08:13:17    INFO: Configuration check succeeded.
2012-02-20 08:13:18 WARNING: Sqlite3 database seems to be corrupt or doesn't exist yet.
2012-02-20 08:13:18    INFO: no sqlite3 backup is available or backup is corrupt. automatically creating database...
2012-02-20 08:13:18    INFO: database created successfully.
2012-02-20 08:13:18    INFO: Initialized port: 49153
2012-02-20 08:13:18    INFO: Server bound to: 10.0.0.8
2012-02-20 08:13:19    INFO: MediaTomb Web UI can be reached by following this link:
2012-02-20 08:13:19    INFO: http://10.0.0.8:49153/

Mijzelf wrote:

uClibc 0.9.32 compiled without ipv6, and without rpc, other than needed for nfs, works for mediatomb, nmap and iftop.
I'm not sure about transmission. It starts, and is still complaining about a closed port, but according to iftop connections are made to the serverport, and data is streaming. But after a few minutes the webinterface dies, and a few minutes later the transmission stops.

Anyway, I've uploaded this uClibc version (it's not in the slacker menu) and an updated transmission. (The old one was dependent on ip6addr_any, which was no longer available)

Did you install it already?

Mijzelf, this is what I can find in Makefile file:

Lines 109 and 110:
CFLAGS =  -I/ffp/include/libxml2   -I/usr/include -I/usr/include -I/usr/include -I/ffp/lib/
CPPFLAGS =  -I/ffp/include/libxml2   -I/usr/include -I/ffp/include/sigc++-2.0 -I/ffp/lib/sigc++-2.0/include   -I/usr/include -I/usr/include -I/usr/include

Lines 178 to 181:
libsigc_CFLAGS = -I/ffp/include/sigc++-2.0 -I/ffp/lib/sigc++-2.0/include  
libsigc_LIBS = -L/ffp/lib -lsigc-2.0  
libxml2_CFLAGS = -I/ffp/include/libxml2  
libxml2_LIBS = -L/ffp/lib -lxml2

But there is no libcrypto in /ffp/include only in /ffp/lib.

What are the entries I will have to add then in my Makefile ?

Thanks again Mijzelf for your great help but adding -lcrypto to libsigc_LIBS did not work. I finally found the solution. I have replaced the line

LDFLAGS =  -L/ffp/lib -lxml2   -L/usr/lib -L/ffp/lib -lsigc-2.0 -L/usr/lib -L/usr/lib -L/usr/lib

with

LDFLAGS =  -L/ffp/lib -lxml2   -L/usr/lib -L/ffp/lib -lsigc-2.0 -lcrypto -L/usr/lib -L/usr/lib -L/usr/lib

and it worked !

But now when I launch a make install-strip, I've got another problem:

root@NAS:/mnt/HD_a2/ffpbuildenv_07/nzbget-0.7.0# DESTDIR=/ffp/tmp make install-strip
/ffp/bin/make  INSTALL_PROGRAM="/ffp/bin/sh /mnt/HD_a2/ffpbuildenv_07/nzbget-0.7.0/install-sh -c -s" \
          install_sh_PROGRAM="/ffp/bin/sh /mnt/HD_a2/ffpbuildenv_07/nzbget-0.7.0/install-sh -c -s" INSTALL_STRIP_FLAG=-s \
          `test -z '' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG=''"` install
/ffp/bin/sh: svnversion: command not found
make[1]: Entering directory `/mnt/HD/HD_a2/ffpbuildenv_07/nzbget-0.7.0'
/ffp/bin/sh: svnversion: command not found
make[2]: Entering directory `/mnt/HD/HD_a2/ffpbuildenv_07/nzbget-0.7.0'
test -z "/usr/local/bin" || mkdir -p -- "/ffp/tmp/usr/local/bin"
  /ffp/bin/sh /mnt/HD_a2/ffpbuildenv_07/nzbget-0.7.0/install-sh -c -s 'nzbget' '/ffp/tmp/usr/local/bin/nzbget'
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/mnt/HD/HD_a2/ffpbuildenv_07/nzbget-0.7.0'
make[1]: Leaving directory `/mnt/HD/HD_a2/ffpbuildenv_07/nzbget-0.7.0'

It seems that it complains about svnversion now. It means TortoiseSVN ?

Last edited by R0b1n (2012-02-23 10:06:48)

@DiskCrasher: Sorry, I have no idea what is going wrong. On my box it just works.
Have you checked dmesg? If that also reports I/O errors it has nothing to do with the FFP packages.

No errors in dmesg.

Ok, here is nzbget 0.7.0 compiled for ffp 0.7 arm: http://www.wupload.com/file/2666767027/ … -arm-1.txz

and its dependencies compiled by me for ffp 0.7 arm too if you need to recompile it:
http://www.wupload.com/file/2666767032/ … -arm-1.txz
http://www.wupload.com/file/2666767037/ … -arm-1.txz

(If someone could upload them to his repository it will be very good )

You will have to install libxml12 for compilation too.

This nzbget package is the same as for optware on ffp 0.5. After installation, you will find a /ffp/opt/etc directory where you have to put the config file and a ffp/share/doc/nzbget directory when you can find a configuration and post processing example files.

I will probably made a second revision later with the config file in /ffp/etc/ if I find where I can change the path in source code. But it works as it is for the moment.

Enjoy !

Last edited by R0b1n (2012-02-24 10:30:30)

Hi all.

Here is the second revision of my nzbget 0.7.0 package for ffp 0.7 arm: http://www.wupload.com/file/2667161462/ … -arm-2.txz

This version is totaly optware free now

Change log:
- nzbget looks for nzbget.conf directly in /ffp/etc.
- nzbgetd has been fixed to launch nzbget binary in /ffp/bin.

Last edited by R0b1n (2012-02-25 09:29:12)

zenji2011 wrote:

Hi,

Is it possible to install OARM packages on ffp 0.5 installs - do you HAVE to update?

Cheers.

Packages compiled for ffp 0.7-oarm are linked to a new version of uClibc, and hence will most likely fail on a ffp-0.5 installation.

So yes, you have to upgrade to ffp-0.7 in order to use the new packages.

Install this package: http://inreto.de/ffp/0.7/oarm/packages/ … oarm-1.txz

Please also note this post by fonz regarding ffp-0.7 on oarm.
You should consider switching to ffp-0.7-oabi instead.

You can find an explanation here for the differences between OABI (oarm) and EABI (arm): http://www.oesf.org/index.php?title=Q3: … nd_EABI%3F

fonz simply chose a new name for a rebuild of ffp-0.7 for older arm devices, so people don't get confused. Once you switch to 0.7-oabi, you can't use any 0.7-oarm packages anymore (i.e. everything needs to be recompiled).