Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I have had my DNS-323 for a while now and its time to add another disk, can I add the disk without risking the first one to be reformatted.
DNS-323
FW 1.3
Offline
Are you planning on changing from Standard to Raid with the second disk or just two seperate volumes? If you leave it at standard (which is only allowed with 1 disk) then you will be fine and a new Volume_2 will be created. However if you plan to Raid 0 or Raid 1 the device you will be required to format to the new partition system.
-Aaron
Offline
I want to have two separate disks.
I chickened out and copied our document folder (20 of 400MB) and removed my first disk from the DNS-323 then formatted the new one before putting the old one back.
Better safe than sorry
Offline
What if it starts as Standard (only option with 1 disk), and I add a 2nd disk for (Raid 1?) mirroring? Will it allow me to mirror the first disk or will I have to loose everything and start over formatting both drives for mirroring?
Offline
You will have to format both disks in order to setup the Raid 1 Partition for mirroring. You would need to backup your data somewhere else and then setup raid.
-Aaron
Offline