Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hi,
for everybody who wants to get bluetooth working on the DNS-323 I've compiled all needed .ko modules.
Offline
It would be nice to know how to use these : where to put them, What modules to load. How to scan for devices and pair with them etc ...
I would like to use my DNS-323 with a bluetooth module in order to be able to use it with the sma-bluetooth code (in order to sync the output of my SMA inverter with pvoutput.org)
Please advice
Offline
MaXX99 wrote:
It would be nice to know how to use these : where to put them, What modules to load. How to scan for devices and pair with them etc ...
I would like to use my DNS-323 with a bluetooth module in order to be able to use it with the sma-bluetooth code (in order to sync the output of my SMA inverter with pvoutput.org)
Please advice
Hi,
thats the same reason I compiled the drivers for ;-)
the modules will be loaded by the command: insmod module.ko
Loaded modules are listed by: lsmod
Just install all modules from the bluetooth dir. You have to install them by a specific order. You have to find out the order. (1. firmware_class.ko, 2. bluetooth.ko, 3. bcm2....ko or bfusb.ko, 4. hci_usb.ko,......)
For using it for smatool I use currently DEBIAN Squeeze on my DNS-323 because it is much easier to to it.
You just need to install the needed apts from the Debian repository and it works. (also compiling is possible quite easy)
The ALT-F firmware is very good for it. It has the newest kernel and it allows you to install the debian squeeze system.
Last edited by korzyn (2012-06-18 22:23:29)
Offline