DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2012-09-09 05:40:13
- mitchkramez
- Member
- Registered: 2009-01-12
- Posts: 12
Failed Drive
Had two drives in Raid 1 - both 500gb drives. The one in bay 2 failed. I had a spare 750gb drive that dropped into bay 2. Dropped it in an followed the instructions in the web admin, but now it listing drive 1 as Raid 1 and drive 2 as JBOD... I have another 750gb drive I can put in, but I really don't want to lose all my configuration and ffp stuff since I have so much time invested in that - can anyone point me in the right direction to get the second drive setup to be a mirror of the 500gb in bay 1 or any other pointers?
Offline
#2 2012-09-09 18:37:35
- fordem
- Member
- Registered: 2007-01-26
- Posts: 1938
Re: Failed Drive
Check your volume sizes - if Volume_2 is shown as 250GB you're good.
Previously you should have had a single volume (Volume_1) which is the "logical" drive made from the two physical drives, when you replaced the failed drive with a larger drive the DNS-323 should have used 500GB of it to mirror the first physical disk, and then use the remaining 250GB as a new JBOD volume which it will call Volume_2.
Offline
#3 2012-09-10 05:35:20
- mitchkramez
- Member
- Registered: 2009-01-12
- Posts: 12
Re: Failed Drive
fordem,
perfect - thanks - that's exactly what was going on... no more worries 
http://d.pr/i/Vicw
Offline