DSM-G600, DNS-3xx and NSA-220 Hack Forum

Transmission v2.74 is now available for all platforms from the first post.

well i spent 4 days to make transmission work with dns 320l.
first off all i was going insane with fun flug 0.7-can't make ssh connection with putty- find solution with
sshd_start()
{
    # need sshd user and group for priviledge separation
    if ! grep '^sshd:' /etc/passwd >/dev/null; then
        echo 'sshd:x:33:33:sshd:/:/bin/false' >>/etc/passwd
    fi
    if ! grep '^sshd:' /etc/shadow >/dev/null; then
        echo 'sshd:*:9797:0:::::' >>/etc/shadow
    fi
    if ! grep '^sshd:' /etc/group >/dev/null; then
        echo 'sshd::33:sshd' >>/etc/group
    fi

    # generate host keys
    if [ ! -r /ffp/etc/ssh/ssh_host_key ]; then
        /ffp/bin/ssh-keygen -t rsa1 -f /ffp/etc/ssh/ssh_host_key -N ''
    fi
    if [ ! -r /ffp/etc/ssh/ssh_host_dsa_key ]; then
        /ffp/bin/ssh-keygen -t dsa -f /ffp/etc/ssh/ssh_host_dsa_key -N ''
    fi
    if [ ! -r /ffp/etc/ssh/ssh_host_rsa_key ]; then
        /ffp/bin/ssh-keygen -t rsa -f /ffp/etc/ssh/ssh_host_rsa_key -N ''
    fi
    if [ ! -f /etc/ssh/ssh_host_ecdsa_key ]; then
        /ffp/bin/ssh-keygen -t ecdsa -f /ffp/etc/ssh/ssh_host_ecdsa_key -N ''
    fi
    chmod 700 /ffp/var/lib/sshd/
    chmod 700 /ffp/etc/ssh/ssh_*
    proc_start $command

sshd must have the last 3 lines for putty to work well.
then on transmission, i started with the command
transmission-daemon -g /mnt/HD/HD_a2/.transmission-daemon -f,nothing like nobody...works for me
i had all the errors like tr crypto 00000000.....etc and 403 forbidden.......
for me work"alt-speed-down": 50,
    "alt-speed-enabled": false,
    "alt-speed-time-begin": 540,
    "alt-speed-time-day": 127,
    "alt-speed-time-enabled": false,
    "alt-speed-time-end": 1020,
    "alt-speed-up": 50,
    "bind-address-ipv4": "0.0.0.0",
    "bind-address-ipv6": "::",
    "blocklist-enabled": false,
    "blocklist-url": "http://www.example.com/blocklist",
    "cache-size-mb": 2,
    "dht-enabled": true,
    "download-dir": "/mnt/HD/HD_a2/Download",
    "download-queue-enabled": true,
    "download-queue-size": 5,
    "encryption": 0,
    "idle-seeding-limit": 30,
    "idle-seeding-limit-enabled": false,
    "incomplete-dir": "/home/nobody/Downloads",
    "incomplete-dir-enabled": false,
    "lpd-enabled": false,
    "message-level": 2,
    "peer-congestion-algorithm": "",
    "peer-limit-global": 240,
    "peer-limit-per-torrent": 60,
    "peer-port": 51413,
    "peer-port-random-high": 65535,
    "peer-port-random-low": 49152,
    "peer-port-random-on-start": false,
    "peer-socket-tos": "default",
    "pex-enabled": true,
    "port-forwarding-enabled": true,
    "preallocation": 1,
    "prefetch-enabled": 0,
    "queue-stalled-enabled": true,
    "queue-stalled-minutes": 30,
    "ratio-limit": 2,
    "ratio-limit-enabled": false,
    "rename-partial-files": true,
    "rpc-authentication-required": true,
    "rpc-bind-address": "0.0.0.0",
    "rpc-enabled": true,
    "rpc-password": "{778505bf3dc8f12d9a34f65da120a90d2fa021d3rnB4wQ7H",
    "rpc-port": 9091,
    "rpc-url": "/transmission/",
    "rpc-username": "",
    "rpc-whitelist": "127.0.0.1,192.168.*.*",
    "rpc-whitelist-enabled": true,
    "scrape-paused-torrents-enabled": true,
    "script-torrent-done-enabled": false,
    "script-torrent-done-filename": "",
    "seed-queue-enabled": false,
    "seed-queue-size": 10,
    "speed-limit-down": 100,
    "speed-limit-down-enabled": false,
    "speed-limit-up": 100,
    "speed-limit-up-enabled": false,
    "start-added-torrents": true,
    "trash-original-torrent-files": false,
    "umask": 18,
    "upload-slots-per-torrent": 14,
    "utp-enabled": true

i delete here my username pass

hope i help people with 320l-it's very good to run torrents with the pc closed

Which version of funplug are you running on the DNS-321?

I tried building Transmission 2.03, but it's too old. I get compiler errors that I'm not eager to fix.
You should talk to your tracker admin to update its client policy. Transmission 2.03 is almost 3 years old. A lot has changed since then.

Thanks for trying.  I was invited to iptorrents.  I looked around and they've been on transmission 2.03 for a long time.  I think they've updated for utorrent though.  But since I'm running it on my NAS, I've been using transmission.  According to them, any transmission past 2.03 gives incorrect statistics, which I checked and found to be true.

I'm not sure if it's okay to ask here, but if anyone has invites to a better private tracker, I would love an invite.

Again, thank you for the help!

My issue with iptorrents was that even when I wasn't downloading (seeding only), my download statistic would continue to increase and so I couldn't fix my share ratio and it continue to decrease.  I have since paused all of my iptorrent torrents and it's holding steady.  I even tried some "freeleech" torrents to increase my ratio (as per their FAQ), but it still continued to count the download.

Hi KyleK,

as a uncapable person to compile a linux program , I thank you so much for your regular update.
and if you have time and wish , please compile  the new version of Transmission for us.

thank you again for your past and future contribution for this community.

@KyleK
thanks you so much once more for your great support :-)

OK, noob allert.

I just got my NSA320 and managed to install ffp and using slacker I think I installed Transmission.
Made all the directories I want to use and chown'd them.
When I run the: su nobody -c "transmission-deamon -f etc etc it does not start transmission, i get a msg back: No shell.

there is no settings.json file generated.

So I have two questions.
How do I check in slacker actually installed transmission? I think it did, but how do I know for sure?
What do I do to fix the No shell error?

oh yes, one more detail, after I installed ffp, I see in packages that it is running but not chrooted.
Any ideas how to fix? Thanks.

Ah great, thanks Kylek.
That worked, now I get the following error:
/ffp/bin/sh: transmission-deamon: command not found

but at least something happened!
Any ideas?

Hmm, which transmission-daemon shows /ffp/bin/transmission-daemon.
And I had already installed the latest version of Transmission.
If I now run slacker -a it shows the option reinstall Transmission-2.76-arm-1

So that should mean it is installed.
I can run the transmission.sh in the Start dir. I get back the text: Starting transmission-daemon and noting else, no errors or any other text.

Hey, if I go to my nas io address:9091, it tells me it is forbidden, as I am not on the whitelist! So that means it is running. Now I need to edit my settings.json.
OK! I can see my Transmission webinterface.

Thanks so much Kylek.

Yes that makes sense.
Most of it is working now, thanks.
Only thing it does not do yet is the automatic watch dir.
I have set:

"watch-dir": "/mnt/HD_a2/public/Torrents",
"watch-dir-enabled": true

And it does not do it. It does store incomplete torrents in the Incomplete dir I specified the same way.

Any ideas?

I can use it, but I have to drop the torrent files in manually, then it all works, but I wanted Transmission as it has a watched dir option.
I will keep on trying, unless you have another brilliant idea?