Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I just got my DNS-323, but it cannot be found from Easy Search Utility on my laptop with WLAN. In the manual it says that the default IP address without DHCP is 192.168.0.32, but my SCM WLAN routers IP address is 192.168.2.1 and subnet mask 255.255.255.0, so I think that this is the problem now...
I really wouldn't want to change IP settings for all my computers, so is it possible to change the DNS-323's IP address to be something like 192.168.2.xxx??? Somehow it sounds impossible for me, I mean; how could I change the IP address when I cannot access the box at all...?
Offline
Solution 1 : If your router is a DHCP server, it should be able to deliver a valid IP@192.168.2.x to your DNS323. Is it a DHCP server? Have you checked this (i.e see the "attached devices" from the router)?
Solution 2 : use the Ethernet board of your laptop, give it address 192.168.0.1, connect directly to your DNS 323 through a cross link cable, and you should then be able to "see" the DNS323 at 192.168.0.32. Then, change the address of the box...
Offline
dkl wrote:
Solution 2 : use the Ethernet board of your laptop, give it address 192.168.0.1, connect directly to your DNS 323 through a cross link cable, and you should then be able to "see" the DNS323 at 192.168.0.32. Then, change the address of the box...
That did it, thank you very much for your quick help, dkl!
Offline