DSM-G600, DNS-3xx and NSA-220 Hack Forum

Thanks for the tips Mijzelf!

Still learning the ropes on Linux

mldonkey-3.1.3-arm-1.txz. Let me know if it works for you.

Hello,

I compile a minecraft server for NAS, this server is based on c++ port of minecraft java server.
http://mc-server.org/


You can find this package here: http://ffp.memiks.fr/pkg/MCServer-1182-arm-1.txz

for this package you need screen
and start /ffp/start/MCServer.sh

after that you can access to webadmin through http://nasip:8081/ (admin / admin)

could you please test ? I do not have minecraft for the moment...

Fred

jotenakis wrote:

is there a way to have oabi packages for
syslog
openvpn
mysecureshell
?

Hello, I finally create a script to chroot a ffp oabi in ffp arm installation.
And I am able to compile packages for OABI or ARM installation of fun_plug.

Now, I will compile all my packages for oabi and make update of my repository ASAP

Fred.

Last edited by memiks (2013-02-05 10:53:13)

Ok I made this script : http://ffp.memiks.fr/run_chroot.sh to chroot FFP 0.7 OABI into already installed FFP 0.7 ARM

just do :
create a new folder for exemple :
mkdir ./your_ffp_folder_chroot

go into it :
cd ./your_ffp_folder_chroot

get script, change permission
wget http://ffp.memiks.fr/run_chroot.sh
chmod a+x ./run_chroot.sh

execute it :
./run_chroot.sh

you will arrived to a shell in chroot environnement ( ./your_ffp_folder_chroot will be / of the chroot system).
to quit just type exit.

If you start ./run_chroot "slacker -Uu" you will update slacker sites and go to update interface and after that quit chroot.

I made it after see this page : http://www.inreto.de/ffp/0.7/oabi/extra … README.txt

You can test it and tell me if it works for you.

Last edited by memiks (2013-02-06 13:59:07)

/ffp/sbin/openvpn: can't load library 'liblzo2.so.2'
despite I have installed http://ffp.memiks.fr/pkg/oarm/lzo-2.06-oarm-1.txz

Thanks it works now
Have u tried to compile syslog ans mysecureshell ?

Last edited by jotenakis (2013-02-16 00:22:53)

Hello,

I finally found how to compile MySecureShell you can find it here: http://ffp.memiks.fr/pkg/mysecureshell-1.30-arm-1.txz (for EABI installation).

Of course, for security reason, I do not provide configuration file.

You must create it in /etc/ssh/sftp_config

Fred.

Open VPN is already compiled.

Stranger wrote:

Fred, hello,

Do I have any chance you to compile NUT (for example, http://buildbot.networkupstools.org/~bu … nload.html) for ARM (DNS-343)?

It would be great.

Thanks in advance,
Stranger

DONE : http://ffp.memiks.fr/pkg/nut-2.6.5-arm-1.txz
Could you please test ?

Package is compile with:
- usb support (need libusb package)
- snmp support (need snmp package)
- cgi support

this version is for ARM EABI only, if you need it for OABI system please send me a request

Best regards,
Fred.

Repeat here too about the nut package:

1. snmp-ups is working as well as net-snmp!

2. could not understand whether .cgi works

3. does somebody need a short instruction (for snmp configs)?

3. Please place the "/ffp/start/upsd.sh.new" script into appropriate path with rw-r--r-- (644)  permissions

Content of the "/ffp/start/upsd.sh.new":

#!/ffp/bin/sh
# Original by Stranger

# PROVIDE: upsd
# REQUIRE: none

. /ffp/etc/ffp.subr

name="upsd"
command="/ffp/sbin/upsd"
upsd_configuration="/ffp/etc/upsd.conf"
upsd_flags=""
required_files="/ffp/etc/ups.conf"

extra_commands="reload logstart logstop"
start_cmd="upsd_start"
stop_cmd="upsd_stop"
status_cmd="upsd_status"
check_cmd="upsd_check"
reload_cmd="upsd_reload"
logstart_cmd="upsd_logstart"
logstop_cmd="upsd_logstop"

# user settings
ups_name="your-ups-name-here"
upsdrvctl_command="/ffp/bin/upsdrvctl"
log_command="/ffp/bin/upslog"
log_file="/path/to/log-file.log"
log_format="%TIME @Y@m@d,@H@M@S%,%VAR battery.charge%,%VAR input.voltage%,%VAR ups.load%,[%VAR ups.status%],%VAR ups.temperature%,%VAR input.frequency%"
mon_command="/ffp/sbin/upsmon"

upsd_start()
{
    echo "Starting driver"
    $upsdrvctl_command start 2>&1
    echo "Starting ups data server"
    $command 2>&1
    echo "Starting ups monitoring..."
    $mon_command 2>&1
}

upsd_stop()
{
    echo "Stopping ups monitoring..."
    $mon_command -c stop
    echo "Stopping ups data server"
    [ $(pidof -g upsd) -gt 0 ] && $command -c stop 2>&1
    echo "Stopping driver"
    $upsdrvctl_command stop 2>&1

}

upsd_status()
{

    if [ $(pidof -g upsmon) -gt 0 ]; then
    echo "ups monitoring are running... with pids $(pidof upsmon)"
    else
    echo "ups monitoring are stopped"
    fi

    if [ $(pidof -g upsd) -gt 0 ]; then
    echo "upsd services are running... with pids $(pidof upsd)"
    else
    echo "upsd services are stopped"
    fi

    if [ $(pidof -g snmp-ups) -gt 0 ]; then
    echo "snmp-ups drivers are running... with pids $(pidof snmp-ups)"
    else
    echo "snmp-ups drivers are stopped"
    fi
}

upsd_reload()
{
    echo "Reloading upsmon configuration ..."
    $mon_command -c reload 2>&1

    echo "Reloading upsd configuration ..."
    $command -c reload 2>&1

}

upsd_logstart()
{
    echo "Starting log to file ${log_file}"
    $log_command -f "$log_format" -s $ups_name -l "$log_file" 2>&1

}

upsd_logstop()
{
    echo "Stopping log to file ${log_file}"
    if [ $(pidof -g upslog) -gt 0 ]; then
    echo "log service is running... stopping it..."
    kill -9 $(pidof upslog) 2>&1
   
    else
    echo "log service is not running"
   
    fi
}

run_rc_command "$1"

Last edited by Stranger (2013-03-22 23:59:40)

?
Thanks