DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2013-03-28 19:29:10

djtaz
Member
Registered: 2010-04-03
Posts: 33

Firmware upgrade Opps

I just tried to upgrade the firmware on my Dns323 from 1.08 to 1.10 and it seemed to upload ok on the page (got to the end) and then i got an UNABLE TO CONNECT webpage.
I wasnt able to get in on http or https or on network share , but i was able to ping the IP address.  I left it like that for 20 minutes and it was still the same , so i tried a restart on it, now i have a flashing light -
and no access on ping or http or anything.

Dont suppose theres any cure for such a thing ?

Offline

 

#2 2013-03-28 20:11:49

FunFiler
Member
Registered: 2010-05-23
Posts: 577

Re: Firmware upgrade Opps

Try resetting again. Also, you can try and leave it for a few hours. Which light specifically is flashing? Could indicate a Raid rebuild too.


3 * (DNS-323 with 2 * 2TB) = 12TB Running FW v1.08 & FFP v0.5
Useful Links: Transmission, Transmission Remote, Automatic

Offline

 

#3 2013-03-28 20:15:25

djtaz
Member
Registered: 2010-04-03
Posts: 33

Re: Firmware upgrade Opps

The blue light on the front was flashing and the fan sounds like its staying on sad

Offline

 

#4 2013-03-30 00:35:52

djtaz
Member
Registered: 2010-04-03
Posts: 33

Re: Firmware upgrade Opps

right , well i found a page explaining how to install the firmware using a serial cable , which i happened to have and i created the files required for firmware 1.10

You can skip down as far as tera term and use the files i attach if you get it working , but for some reason i couldnt get the marvel prompt

http://dns323.kood.org/howto:reflash_from_windows

I have put the files on http://www.djtazie.com/dns323

Last edited by djtaz (2013-03-30 00:52:44)

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB