DSM-G600, DNS-3xx and NSA-220 Hack Forum

Here you are: nut-2.6.5-arm-0.txz. It's at least dependent on libusb-1.0 and libgd, which are on the same page (and in slacker). libgd is dependent on libpng and libjpeg.

Let me know if you have developed any startscripts and configuration files, which can be added to the package.

1. snmp-ups is working as well as net-snmp!

2. could not understand whether .cgi works

3. does somebody need a short instruction (for snmp configs)?

3. Please place the "/ffp/start/upsd.sh.new" script into appropriate path with rw-r--r-- (644)  permissions

Content of the "/ffp/start/upsd.sh.new":

#!/ffp/bin/sh
# Original by Stranger

# PROVIDE: upsd
# REQUIRE: none

. /ffp/etc/ffp.subr

name="upsd"
command="/ffp/sbin/upsd"
upsd_configuration="/ffp/etc/upsd.conf"
upsd_flags=""
required_files="/ffp/etc/ups.conf"

extra_commands="reload logstart logstop"
start_cmd="upsd_start"
stop_cmd="upsd_stop"
status_cmd="upsd_status"
check_cmd="upsd_check"
reload_cmd="upsd_reload"
logstart_cmd="upsd_logstart"
logstop_cmd="upsd_logstop"

# user settings
ups_name="your-ups-name-here"
upsdrvctl_command="/ffp/bin/upsdrvctl"
log_command="/ffp/bin/upslog"
log_file="/path/to/log-file.log"
log_format="%TIME @Y@m@d,@H@M@S%,%VAR battery.charge%,%VAR input.voltage%,%VAR ups.load%,[%VAR ups.status%],%VAR ups.temperature%,%VAR input.frequency%"
mon_command="/ffp/sbin/upsmon"

upsd_start()
{
    echo "Starting driver"
    $upsdrvctl_command start 2>&1
    echo "Starting ups data server"
    $command 2>&1
    echo "Starting ups monitoring..."
    $mon_command 2>&1
}

upsd_stop()
{
    echo "Stopping ups monitoring..."
    $mon_command -c stop
    echo "Stopping ups data server"
    [ $(pidof -g upsd) -gt 0 ] && $command -c stop 2>&1
    echo "Stopping driver"
    $upsdrvctl_command stop 2>&1

}

upsd_status()
{

    if [ $(pidof -g upsmon) -gt 0 ]; then
    echo "ups monitoring are running... with pids $(pidof upsmon)"
    else
    echo "ups monitoring are stopped"
    fi

    if [ $(pidof -g upsd) -gt 0 ]; then
    echo "upsd services are running... with pids $(pidof upsd)"
    else
    echo "upsd services are stopped"
    fi

    if [ $(pidof -g snmp-ups) -gt 0 ]; then
    echo "snmp-ups drivers are running... with pids $(pidof snmp-ups)"
    else
    echo "snmp-ups drivers are stopped"
    fi
}

upsd_reload()
{
    echo "Reloading upsmon configuration ..."
    $mon_command -c reload 2>&1

    echo "Reloading upsd configuration ..."
    $command -c reload 2>&1

}

upsd_logstart()
{
    echo "Starting log to file ${log_file}"
    $log_command -f "$log_format" -s $ups_name -l "$log_file" 2>&1

}

upsd_logstop()
{
    echo "Stopping log to file ${log_file}"
    if [ $(pidof -g upslog) -gt 0 ]; then
    echo "log service is running... stopping it..."
    kill -9 $(pidof upslog) 2>&1
   
    else
    echo "log service is not running"
   
    fi
}

run_rc_command "$1"

Last edited by Stranger (2013-03-22 23:58:51)

I processed your suggestions in version #1:
http://downloads.zyxel.nas-central.org/ … S.html#nut