DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2016-10-16 21:47:52
- kostasoft
- New member
- Registered: 2016-10-16
- Posts: 4
DNS-323 A1 and Debian Installer
Hello!
My device is Dlink DNS-323 ver. A1
I followed this instruction: https://wiki.debian.org/InstallingDebia … nk/DNS-323
After restart it was connected on ssh to the device
I reached creation of sections on a disk.
but it is impossible to apply changes, there is input/output error
If in case of installation to set a tick opposite to fdisk, then in new ssh-session after a command: fdisk -l /dev/sda
I receive an error: fdisk: cannot open /dev/sda: Input/output error
But the installer sees a disk, sees its size though can make nothing with it.
How to me to force to be installed Debian on a hard drive of my device?
Help, please!
Last edited by kostasoft (2016-10-16 22:02:35)
Offline
#3 2016-10-17 00:19:09
- kostasoft
- New member
- Registered: 2016-10-16
- Posts: 4
Re: DNS-323 A1 and Debian Installer
Here what tells parted on the device (tried disks different, both on 2Tb and on 80Gb):
parted /dev/sda
GNU Parted 3.2
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
print
Error: /dev/sda: unrecognised disk label
Model: ATA ST380815AS (scsi)
Disk /dev/sda: 80.0GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
(parted) mklabel msdos
mklabel msdos
Error: Input/output error during read on /dev/sda
Retry/Ignore/Cancel?
Last edited by kostasoft (2016-10-17 00:38:56)
Offline
#4 2016-10-17 10:12:13
- kostasoft
- New member
- Registered: 2016-10-16
- Posts: 4
Re: DNS-323 A1 and Debian Installer
~ # fdisk -l /dev/sda
fdisk: cannot open /dev/sda: Input/output error
~ # tail /var/log/syslog
Oct 17 10:01:46 kernel: [ 679.104549] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Oct 17 10:01:46 kernel: [ 679.136634] ata1.00: configured for UDMA/33
Oct 17 10:01:46 kernel: [ 679.136725] ata1: EH complete
Oct 17 10:01:46 kernel: [ 679.144631] ata1.00: exception Emask 0x10 SAct 0x80 SErr 0x0 action 0x6 frozen
Oct 17 10:01:46 kernel: [ 679.144666] ata1.00: edma_err_cause=00000280 pp_flags=00000003, parity error, EDMA self-disable
Oct 17 10:01:46 kernel: [ 679.144699] ata1.00: failed command: READ FPDMA QUEUED
Oct 17 10:01:46 kernel: [ 679.144762] ata1.00: cmd 60/08:38:00:00:00/00:00:00:00:00/40 tag 7 ncq 4096 in
Oct 17 10:01:46 kernel: [ 679.144762] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x10 (ATA bus error)
Oct 17 10:01:46 kernel: [ 679.144792] ata1.00: status: { DRDY }
Oct 17 10:01:46 kernel: [ 679.144835] ata1: hard resetting link
~ # fdisk -l /dev/sdb
fdisk: cannot open /dev/sdb: Input/output error
~ # tail /var/log/syslog
Oct 17 10:09:45 kernel: [ 1158.288614] ata2.00: configured for UDMA/33
Oct 17 10:09:45 kernel: [ 1158.288703] ata2: EH complete
Oct 17 10:09:45 kernel: [ 1158.296632] ata2.00: exception Emask 0x10 SAct 0x20000 SErr 0x0 action 0x6 frozen
Oct 17 10:09:45 kernel: [ 1158.296667] ata2.00: edma_err_cause=00000280 pp_flags=00000003, parity error, EDMA self-disable
Oct 17 10:09:45 kernel: [ 1158.296703] ata2.00: failed command: READ FPDMA QUEUED
Oct 17 10:09:45 kernel: [ 1158.296767] ata2.00: cmd 60/08:88:08:00:00/00:00:00:00:00/40 tag 17 ncq 4096 in
Oct 17 10:09:45 kernel: [ 1158.296767] res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x10 (ATA bus error)
Oct 17 10:09:45 kernel: [ 1158.296798] ata2.00: status: { DRDY }
Oct 17 10:09:45 kernel: [ 1158.296835] ata2: hard resetting link
Oct 17 10:09:46 kernel: [ 1158.772555] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Offline
#5 2017-07-31 18:47:20
- 049279
- New member
- Registered: 2017-07-31
- Posts: 1
Re: DNS-323 A1 and Debian Installer
Hi kostasoft!
Did you get solution? I've faced the same issue on my DNS-323.
Offline
#6 2017-12-01 07:55:47
- VZerg
- New member
- Registered: 2017-12-01
- Posts: 1
Re: DNS-323 A1 and Debian Installer
Hello everybody!
I have exactly the same problem. The question is the following, having "BusyBox v1.22.1 (Debian 1: 1.22.0-9 + deb8u1) built-in shell (ash)" can I return the device to my old life without using the method described here: http://dns323.kood.org/howto:reflash_from_windows ?
Offline