DSM-G600, DNS-3xx and NSA-220 Hack Forum

suisen · 2007-08-31 06:52:49

I just moved into a new place and after I connected everything up, I turned on my DNS-323 and realized that Easy Search was unable to configure or map drives. When I highlight my 323 on the list of devices, the Config/Language options are greyed out and I cant click on Mount/Dismount when I highlight either drive. Is there any way to fix this or a better way to go about setting up the 323?

Also, I tried accessing the 323 from the IP Address and it times out, what could be causing that? My setup is currently just my Desktop, 323, Airport Express on a switch, which worked fine from my last location. Any suggestions would be much appreciated.

kmick · 2007-08-31 14:27:21

I can never get mine to work over my wireless. Only works wired. At least you have a workaround.

suisen · 2007-09-01 09:59:30

Um, mine does NOT work. And I'm not trying to access over wireless... if you read, my Desktop and the 323 are on a switch together, no wireless involved.

dkl · 2007-09-01 14:40:41

I think you don't absolutely need Easy Search to map a drive. I never used it here... If you use XP, a map to a network drive makes the job, as far as you know the IP address of the box. The Esay Search tool never worked here either, but I don't bother.

ka3ak · 2007-09-02 10:37:46

suisen

How do you know the IP of the box? Did you use the one that box had in old location ? It looks like your DNS 323 is not getting an IP from DHCP ... or you have it setup to static ?

DSM-G600, DNS-3xx and NSA-220 Hack Forum

Announcement

#1 2007-08-31 06:52:49

Can't access Web UI/Map a Drive from Easy Search

#2 2007-08-31 14:27:21

Re: Can't access Web UI/Map a Drive from Easy Search

#3 2007-09-01 09:59:30

Re: Can't access Web UI/Map a Drive from Easy Search

#4 2007-09-01 14:40:41

Re: Can't access Web UI/Map a Drive from Easy Search

#5 2007-09-02 10:37:46

Re: Can't access Web UI/Map a Drive from Easy Search

Board footer