DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2007-09-19 13:24:28

Chumby
Member
From: Tasmania, Australia
Registered: 2007-08-01
Posts: 96
Website

Cannot ping to DNS323

Hi there,

All of a sudden I cannot ping/connect to my dns323. Easy search does not find it anymore either.

I have 2 * 500gb seagates - swapped them over in their bays and now cannot connect at all.

My router is configured in the 10.1.1.* range. (the 323 used to appear OK). If I try to change the router to the 192.168.0.* range it doesn's seem to accept the changes (dlink g604t) - hence cant see 192.168.0.32

I have assigned the MAC address for the machine to a static address in the router as 10.1.1.3, but still can't ping to the 323 after this.

Have changed cables over - no difference.

Any ideas?

Funplug was installed on volume I - worked a treat.  Nothing else.

Cheers
Chumby.

Offline

 

#2 2007-09-19 17:44:37

stefan741
Member
Registered: 2007-09-12
Posts: 22

Re: Cannot ping to DNS323

did you restart the box?

Offline

 

#3 2007-09-20 02:20:21

Chumby
Member
From: Tasmania, Australia
Registered: 2007-08-01
Posts: 96
Website

Re: Cannot ping to DNS323

Hi Stefan,

Thanks - yes I now have successfully got it back and going.  Previously I had "pressed" the reset button, but it wasn't for long enough (I just thought a quick press would do).  Went back, held it in for a lengthy period of time, the blue start button flashed (obviously now properly reset) and bingo and ping back in again.

Thanks mate,
Chumby

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB