DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2007-09-30 16:03:10
- Rocky88
- Member
- Registered: 2007-05-08
- Posts: 10
DNS-323 just wont go into standby
I have DNS-323 with 1.02 firmware. I set the "go to standby mode after 30 minutes" and from the beginning it always normally went into standby, but now it doesn't ever go to standby mode anymore, even if all computers in the network are off including the router. Anyone knows the solution?
Thanx
Offline
#2 2007-09-30 18:12:03
- fordem
- Member
- Registered: 2007-01-26
- Posts: 1938
Re: DNS-323 just wont go into standby
Did you ever use a printer with the DNS-323? There is a known cause for this.
Offline
#3 2007-10-01 11:25:54
- Rocky88
- Member
- Registered: 2007-05-08
- Posts: 10
Re: DNS-323 just wont go into standby
fordem wrote:
Did you ever use a printer with the DNS-323? There is a known cause for this.
Yes, I use printer with DNS-323. How do I fix this then?
Offline
#4 2007-10-01 14:04:50
- fordem
- Member
- Registered: 2007-01-26
- Posts: 1938
Re: DNS-323 just wont go into standby
Read the wiki - it's documented there - search the forum - you're not the only person to have this problem, and not the only person to ask this question withing the last two days.
Offline
#5 2007-10-03 19:41:24
- rori
- Member
- Registered: 2007-09-29
- Posts: 49
Re: DNS-323 just wont go into standby
I had the same problem. It disappeared after upgrading to 1.03
DNS-323 / firmware 1.08b9
fonz funplug ffp:v0.5
firefly: svn-1735 (via funplug) with ogg and flac support streaming to Pinnacle Soundbrigde Home Music firmware 3.0.52
HDD: 2x1,5 TB Seagate HD154UI Rev: 1AG0 in RAID1-mode
Offline
#6 2007-10-03 22:11:15
Re: DNS-323 just wont go into standby
link to the wiki with the information 
http://dns323.kood.org/information:known_issues
Offline
#7 2007-11-09 00:30:37
- Rocky88
- Member
- Registered: 2007-05-08
- Posts: 10
Re: DNS-323 just wont go into standby
I tried upgrading firmware and everything and nothing helped. And the link leper posted has nothing about standby problems...
Is my last resort resetting settings? Will that affect files on hard-drive?
Offline
#8 2007-11-09 05:05:19
- fordem
- Member
- Registered: 2007-01-26
- Posts: 1938
Re: DNS-323 just wont go into standby
Rocky88 wrote:
I tried upgrading firmware and everything and nothing helped. And the link leper posted has nothing about standby problems...
Is my last resort resetting settings? Will that affect files on hard-drive?
So - let me ask this question - one more time - have you ever used a printer with the DNS-323?
If your answer to that question is YES - then click on the link that leper posted and start READING - here's a hint, it's the only issue on the page that deals with printing.
Of course, it's entirely possible that none of us has seen your particular problem before - so - feel free to push the reset button, it will reset the configuration settings but should not affect the data on the disks.
Yes - I did say should not - as in it's not supposed to and didn't when I pushed it on mine, but just as your problem may be different, your experience may be different - but then you do have it backed up, don't you?
Offline
#9 2007-11-11 15:26:09
- Rocky88
- Member
- Registered: 2007-05-08
- Posts: 10
Re: DNS-323 just wont go into standby
fordem wrote:
Rocky88 wrote:
I tried upgrading firmware and everything and nothing helped. And the link leper posted has nothing about standby problems...
Is my last resort resetting settings? Will that affect files on hard-drive?So - let me ask this question - one more time - have you ever used a printer with the DNS-323?
If your answer to that question is YES - then click on the link that leper posted and start READING - here's a hint, it's the only issue on the page that deals with printing.
Of course, it's entirely possible that none of us has seen your particular problem before - so - feel free to push the reset button, it will reset the configuration settings but should not affect the data on the disks.
Yes - I did say should not - as in it's not supposed to and didn't when I pushed it on mine, but just as your problem may be different, your experience may be different - but then you do have it backed up, don't you?
Thank you. It did solve the problem but now print server doesn't work.
Last edited by Rocky88 (2007-11-12 10:46:47)
Offline