DSM-G600, DNS-3xx and NSA-220 Hack Forum

The funny thing is that the funplug script working, but nothing else - can't telnet to the device (I think because of the new kernel....I'm not a linux guy)
maybe Fonz know the answer why...

Btw, the mldonkey core working fine !

Some of the European Dlink sites have a product page for this unit already with a spec sheet pdf in english, but not the UK or US.....
http://www.dlink.dk/?go=gNTyP9CgrdFOIC4 … cRsO7dbA==

Craft, could you PLEASE give us more details, im very interested in getting hold of one of these if it is as powerful as my 323 (i.e. CPU memory etc..)

Many Thanks

Zenji9

Processor    : FA526id(wb) rev 1 (v4l)
BogoMIPS    : 230.19
Features    : swp half
CPU implementer    : 0x66
CPU architecture: 4
CPU variant    : 0x0
CPU part    : 0x526
CPU revision    : 1
Cache type    : write-back
Cache clean    : cp15 c7 ops
Cache lockdown    : format B
Cache format    : Harvard
I size        : 16384
I assoc        : 2
I line length    : 16
I sets        : 512
D size        : 8192
D assoc        : 2
D line length    : 16
D sets        : 256

Hardware    : GeminiA
Revision    : 0000
Serial        : 0000000000000000
.
Linux version 2.6.15 (root@Johnson_linux) (gcc version 3.4.4) #226 Fri Sep 7 14:25:32 CST 2007
.
MemTotal:        30008 kB
MemFree:          1408 kB
Buffers:           952 kB
Cached:          17420 kB
SwapCached:          0 kB
Active:           8876 kB
Inactive:        12444 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        30008 kB
LowFree:          1408 kB
SwapTotal:      506008 kB
SwapFree:       506008 kB
Dirty:             388 kB
Writeback:           0 kB
Mapped:           6188 kB
Slab:             5468 kB
CommitLimit:    521012 kB
Committed_AS:    18172 kB
PageTables:        272 kB
VmallocTotal:   221184 kB
VmallocUsed:     16696 kB
VmallocChunk:   204284 kB

http://www.faraday-tech.com/html/produc … eries.html

its a faraday risc.

£64.61 inc VAT for endusers

Okay, but the mldonkey core (frm shadowandy) is compiled for arm5. And its working on my device.

Because I'm using the same mldonkey on my DNS-323 and my DNS-313.
...or this mldonkey for arm4 and arm5 ??

I just bought the dns-313 And the ftp server is the shittiest pice of crap i ever seen. I figure it's the webui's fault that you cannot set basic ftp security. (one folder with write acces and one with read only. or making users mebers of multiple groups) i can telnet the device but it won't accept anny cmds.
is the hardware the same on dns-323 and 313 ? can i use 323 firmware ? if i upload firmware that brics the device can i reflash it with tftp at boot up as i you can with my wrt54g router ?
I don't want to be the first one experimenting and bricking the device. but i can't live with the terrible ftp support in the device.
is the kernel installed in flash memory and the system installed on the inserted harddrive ? if so it would be as easy as mounting the disk on my stationary computer and getting some toolchan that compiles stuff the right way and just put it on the harddrive putting it back in the unit and get ssh support and other usfull stuff so i can use it as a normal networked computer.?

This may sound like a silly question, but has anyone here experienced problems backing up files to the drive? The supplied backup program (Memeo) and other backup programs (like Microsoft's Synctoy) all give me read/write access errors when copying files to the drive.

Tried using the default access rules and also created my own users and groups - no luck with any of them.

I can copy and rename files to it manually, but copying large files (> 15 GB) over the network causes the unit to disconnect itself from the network altogether. Can't access the drive again no matter how long I leave it, unless I disconnect it's power supply and then reconnect it.

It all works fine over USB though.

I've already tried replacing the unit once due to the same problems. Bought it from Overclockers UK.

Anyone else had similar problems? I'm using it with a Seagate Barracuda 750GB SATA hard drive.

run telnet <IP> from dos or use putty
login as admin
enter unlock code "5784468" (without quotes)
and off you go....