Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hello!
I'm a bit concerned that one of my drives are having some trouble.
The right HDD-LED on the DNS-323 is not working.. possibly because of some drive failure?
Is it possible to check this with telnet and fun_plug? The webinterface doesn't show any warnings.
Here's my dmesg:
Linux version 2.6.12.6-arm1 (jack@SWTEST2) (gcc version 3.3.3) #32 Tue Jan 23 17 :11:52 CST 2007 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 166000000, Tclk = 166000000 - Warning - This LSP release was tested only with U-Boot release 1.7.3 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 16384 DMA zone: 16384 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB 0MB 0MB 0MB = 64MB total Memory: 55936KB available (2466K code, 454K data, 112K init) Calibrating delay loop... 331.77 BogoMIPS (lpj=1658880) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 5826K NET: Registered protocol family 16 Marvell Development Board (LSP Version 1.7.6_NAS)-- RD-88F5181-88SX7042-2xSATA Detected Tclk 166000000 and SysClk 166000000 Marvell USB EHCI Host controller #0: c03ab980 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub cesadev_init(c0012498) Fast Floating Point Emulator V0.9 (c) Peter Teichmann. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A io scheduler noop registered io scheduler deadline registered RAMDISK driver initialized: 16 RAM disks of 10240K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface 'egiga0' scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi2 : Marvell SCSI to SATA adapter scsi3 : Marvell SCSI to SATA adapter Vendor: Seagate Model: ST3250823AS Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 03 Vendor: Seagate Model: ST3250823AS Rev: 3.02 Type: Direct-Access ANSI SCSI revision: 03 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 physmap flash device: 800000 at ff800000 phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. cmdlinepart partition parsing not available RedBoot partition parsing not available Using physmap partition definition Creating 5 MTD partitions on "phys_mapped_flash": 0x00000000-0x00010000 : "MTD1" 0x00010000-0x00020000 : "MTD2" 0x00020000-0x001a0000 : "Linux Kernel" 0x001a0000-0x007d0000 : "File System" 0x007d0000-0x00800000 : "u-boot" ehci_platform ehci_platform.20865: EHCI Host Controller ehci_platform ehci_platform.20865: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.20865: irq 17, io mem 0x00000000 ehci_platform ehci_platform.20865: park 0 ehci_platform ehci_platform.20865: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing init memory: 112K SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 egiga0: mac address changed egiga0: link down Adding 530104k swap on /dev/sda1. Priority:-1 extents:1 Adding 530104k swap on /dev/sdb1. Priority:-2 extents:1 md: bind<sda2> md: bind<sdb2> raid1: raid set md0 active with 2 out of 2 mirrors egiga0: link up<5>, full duplex<5>, speed 1 Gbps<5> md: md0 stopped. md: unbind<sdb2> md: export_rdev(sdb2) md: unbind<sda2> md: export_rdev(sda2) md: md1 stopped. md: bind<sda2> md: bind<sdb2> raid1: raid set md0 active with 2 out of 2 mirrors Link Layer Topology Discovery Protocol, version 1.05.1223.2005 dev is <NULL> egiga0: link down egiga0: link up<5>, full duplex<5>, speed 100 Mbps<5>
Offline