DSM-G600, DNS-3xx and NSA-220 Hack Forum

George, many thanks for this.

I have just installed it and it works ok. For anyone inexperienced in running their own SVN server, these are the steps that you need to do after petasis's steps above:

0. Telnet to DNS-323

1. svnadmin create /mnt/HD_a2/svn
     # that creates the repository

2. cd /mnt/HD_a2/svn

3. cd conf

4. joe svnserve.conf
   # this will open the config file, where everything is commented out (with #)
      you need to uncomment the lines and setup whatever you need. this is what I did
-----
[general]
anon-access = read
auth-access = write

password-db = passwd

authz-db = authz

realm = nas
------
     realm can be anything you want. Just about anything. Save this file with Ctrl+K, hen W. Exit joe with Ctrl+K, then Q

5. joe passwd
      # here add lines user = pass, whatever you want to use to access svn server. Save & exit

6. joe authz
      # here just add this:
----
[/]
* = rw
----
      Save & exit

7. /mnt/HD_a2/fun_plug.d/start/svnserve.sh restart
      # this will restart svn server, and it will load your config changes

8. Now start you SVN client, on your machine and access svn server using
   svn://nas/
or whatever is the URL/IP for your DNS-323.

Now off to add all the projects into it and then kill etch, as I don't need it anymore. petasis, you rule!

You can try editing svnserve.conf, and change anon-access = read to anon-access = none . This way you will need a password for every action.

George

Are you sure you have used the pachage from http://www.ellogon.org/~petasis/DNS323/ … g-0.3.zip? Please if you have installed an earlier release of the package, uninstall it and use the latest release. The binaries in the first posts of the thread http://dns323.kood.org/forum/t1225-Comp … rsion.html indeed had this problem.
In order to be sure, please re-install subversion from the instructions found at the wiki http://dns323.kood.org/howto:subversion:fun_plug_native and ensure that you are using firmware 1.03 and fonz fun_plug 0.3.

George

Hi George,

thanks for your hint. I have now the following entries in subversion.conf:

anon-access = none
auth-access = write
auth-access = read

and now the authentication is required (and works!) for both, committing and updating.

Bernhard

I didn't know that a new version was out :-) I will try to compile it and see how it goes :-)

George, fantastic, thank you very much!!
Regards,
Gareth.

Hi George, yes I'm running subversion on my DNS-323 with firmware 1.04b63 and all is fine. I haven't tried fun_plug 0.4 yet (not sure what the difference is) but I probably will shortly.
Kind regards,
Gareth.

You have to modify the svnserve.sh script (from the start directory). Modify the value of the REPOSITORY variable from its default value ("/mnt/HD_a2/svn/") to anything you want.

Hello there,

i have tried to modify it to run on firmware 1.06 w/ fun_plug 0.5.

I have modify the structure and the prefix in the configuration files :

prefix="/mnt/HD_a2/fun_plug.d"
-->
prefix="/mnt/HD_a2/ffp"

but i have an error :

ERROR: svnserve not found or not executable

An idea ?