DSM-G600, DNS-3xx and NSA-220 Hack Forum

acroly · 2008-01-13 01:20:07

Hi,

I'm had firmware 1.13 and are using Windows Vista, had problems with mounting the drive with easysearch.
I thought the beta firmware 1.14b82 would solve the problem.
Now I have an different problem!!!

I cant find the drive with easysearch or browse to it from IE.
The drive has got an IP address from my DHCP server and I can ping the address.
I have also tried to mount the drive from the command prompt with no success...

Any suggestion what the problem can be?

//Acroly

Wooly · 2008-01-13 01:22:59

Have you checked your firewall settings?

acroly · 2008-01-13 18:49:50

Yes, I have even tried to disable the firewall.
I found it on the network before I upgraded the firmware???

HELP!!!

acroly · 2008-01-13 19:25:14

Yiiipee...

After a factory hardware reset (with a clip behind the DNS) it's now visible in easysearch and I can browse to it!
But....

My old problem is still there, I can't mount it from easysearch or the command prompt...

Have checked that Netbios is set to Default, run secpol.msc, looked up "Network Security: LAN Manager authentication level" and set it to "Send LM & NTLM - use NTLMv2 session security if negotiated"

None of it has helped...

//Acroly
(soon throwing the bastard out of my window....)

acroly · 2008-01-13 20:19:36

Succeded to map it now from the command prompt
"net use y: \\172.16.62.12\Volume_1 /persistent:yes /user:admin"

And now it's accessible, must be the 1.04b82 firmware that made it possible...

Tnx Acroly for the help

DSM-G600, DNS-3xx and NSA-220 Hack Forum

Announcement

#1 2008-01-13 01:20:07

Access problem...

#2 2008-01-13 01:22:59

Re: Access problem...

#3 2008-01-13 18:49:50

Re: Access problem...

#4 2008-01-13 19:25:14

Re: Access problem...

#5 2008-01-13 20:19:36

Re: Access problem...

Board footer