Differences

This shows you the differences between the selected revision and the current version of the page.

howto:encrypted_partitions 2007/11/28 09:09 howto:encrypted_partitions 2017/09/06 18:38 current
Line 1: Line 1:
====== Encrypted partitions for DNS-323 ====== ====== Encrypted partitions for DNS-323 ======
-It is possible to use losetup and friends to have encrypted partitions on your DNS 323. Currently, this is only possible for the 1.03 firmware, unless you fancy compiling your own kernel modules.+It is possible to use losetup and friends to have encrypted partitions on your DNS 323. Currently, this is only possible for the 1.03, 1.05, 1.10b7 firmware, unless you fancy compiling your own kernel modules (see [[howto:crosscompile]]). 
 +But be aware that this will have a huge impact on performance (expect to get about 10% the performance of normal disk access...) 
 + 
 + 
 +===== Firmware dns323_FW_110b07_BETA.zip ===== 
 +Looks like works both encrypted loopback (see instructions below) and dm-crypt + device-mapper (both modules already in kernel). 
 +For work with dm-crypt you need to setup ffp, take all necessary encryption modules from page below (http://www.x-linked.de/dns323/fw105/cryptloop/modules/crypto/). 
 +Using crosscompile (you can use DNS-323 ffp to compile all) compile LVM. Unfortunatly orignal 'install' form busybox does not recognize option -D but you can use workaround (move original symlink /bin/install to /tmp/x/install), put this script into /ffp/bin: 
 +<code perl> 
 +#!/ffp/bin/perl -w 
 + 
 +$res="/tmp/x/install"; 
 +$pre=""; 
 +@AV=@ARGV; 
 +#print ">'".$AV[$#AV-2]."'\n"; 
 + 
 +if( $AV[$#AV-2] eq '-D' ){ 
 +    print "Find -D\n"; 
 +    $AV[$#AV-2] = ""; 
 +    $srcFileName=$AV[$#AV-1]; 
 +    $_=$AV[$#AV]; 
 +    if(/\/([^\/]+?)$/){ 
 +        #$dstPath=$`; 
 +        $shortDstName=$1; 
 +        $AV[$#AV-1]=$1; 
 +        if( $srcFileName ne $shortDstName ){ 
 +            $pre = "cp $srcFileName $shortDstName; "; 
 +        }; 
 +    }; 
 +    map { $res .= " $_" if ($_ ne ""); } @AV; 
 +    $res = $pre . $res; 
 +} else { 
 +    map { $res .= " $_"; } @AV; 
 +}; 
 +`$res`; 
 +# cat install 
 +</code> 
 + 
 +ffp packages what you need (from: http://www.inreto.de/dns323/fun-plug/0.5/): 
 +  * e2fsprogs-1.41.0-1.tgz         
 +  * vreadline-5.2-3.tgz 
 +  * kernel-headers-2.6.9.1-2.tgz   
 +  * make-3.81-3.tgz               
 +  * binutils-2.18.50.0.1-4.tgz 
 +  * gcc-4.1-2.tgz                 
 +  * perl-5.10-2.tgz               
 +  * uclibc-0.9.29-7.tgz 
 +  * wget-1.12-2.tgz 
 +  * grep-2.5.3-2.tgz               
 + 
 +Sources from original developers sites: 
 +  * LVM2.2.02.85.tgz               
 +  * libgcrypt-1.4.6.tar.gz         
 +  * cryptsetup-1.2.0.tar.gz 
 +  * libgpg-error-1.9.tar.gz 
 +  * popt-1.16.tar.gz 
 + 
 +Configuration hint: 
 +<code bash> 
 +./configure --build=arm-linux-uclibc --prefix=/ffp 
 +</code> 
 + 
 +Regarding cryptsetup looks like it is not nesessary because you can setup encrypted device using only device-mapper & dmsetup tool (see http://www.saout.de/misc/dm-crypt/) 
 + 
 + 
 + 
 + 
 +==== Performance in case of dm-crypt ==== 
 +It is really nightmare (if you think to move 1TB data from not encrypted disk to encrypted). F.E. DNS-323 use Samsung 1,5TB drive. 
 +<code bash> 
 +dd bs=10M if=/dev/zero of=zero count=149 
 +</code> takes ~9min (2MB/sec) for encrypted drive and 30s for normal drive (49MB/sec) 
 +<code bash> 
 +dd bs=10M if=zero of=/dev/null count=149 
 +</code> takes ~8min (3MB/sec) for encrypted drive and 30s for normal drive (49MB/sec) 
 + 
 +From another point of view it is not so bad and you can see Full DH movies and play sound from DNS-323 in case if it is connected to your WiFi which is not faster than 2MB/sec. 
 + 
 + 
 +===== Firmware 1.05 ===== 
 +There is no need to install a full-blown Linux distribution, just grab these files: 
 +  * losetup with encryption support in http://www.x-linked.de/dns323/fw105/cryptloop/sbin/losetup 
 +  * cryptloop.ko Kernel module in http://www.x-linked.de/dns323/fw105/cryptloop/modules/block/cryptoloop.ko 
 +  * all available encryption modules in http://www.x-linked.de/dns323/fw105/cryptloop/modules/crypto/ -- choose one 
 +<code bash> 
 +insmod cryptoloop.ko 
 +insmod algorithm_of_your_choice.ko 
 +</code> 
 +That's all you need, now go read http://www.faqs.org/docs/Linux-HOWTO/Loopback-Encrypted-Filesystem-HOWTO.html on how to setup an encrypted disk image. 
 + 
 +===== Firmware 1.03 =====
==== Setting Up ==== ==== Setting Up ====
Line 24: Line 114:
==== Crypto speeds ==== ==== Crypto speeds ====
-These speeds were found by writing /dev/zero to a 10mb crypto device, and reading it back again. They were run 3 times and averaged.+These speeds were found by writing /dev/zero to a 10mb crypto device on the 1.03 Firmware, and reading it back again. They were run 3 times and averaged.
  aes          - 128 bit - 1.5 MB/s write - 2.1 MB/s read   aes          - 128 bit - 1.5 MB/s write - 2.1 MB/s read
Line 36: Line 126:
  xor          -  1 bit - 2.7 MB/s write - 5.5 MB/s read   xor          -  1 bit - 2.7 MB/s write - 5.5 MB/s read
  twofish-256  - 256 bit - 2.1 MB/s write - 4.2 MB/s read   twofish-256  - 256 bit - 2.1 MB/s write - 4.2 MB/s read
 +
 +A quick test with different hardware on 1.05 Firmware reveals a 90% performance impact compared to unencrypted disks
 +^ encryption ^ write speed ^ read speed ^
 +| aes | 3.8 MB/s | 3.6 MB/s |
 +| none | 40 MB/s | 49 MB/s |

Navigation
[Edit]
Personal Tools