This is an old revision of the document!
Main Page Talk
Since regular users can't modify Main Page then here is the right place where you can point out some Main Page mistakes or suggestions how to improve it
Done
Would it be possibe to remove the help text for DNS, which in this case i a part of the product name and not Domain Name Server.
Also, can we rename the “How-to fun_plug” to something more informative, e.g. “Howto Hack” or something more appropriate. A user entering for the first time will look for “hack” and doesn't have a clue what the fun_plug is,
Instead of
[[http://en.wikipedia.org/xxx|xxx]]'' use ''[[wp>XXX|XXX]]
Hardware Specifications: i would suggest to show also average values of powerconsumption for this embedded device. thats seems an important infomation for comparison of embedded linux nas-devices (to me).
look here: http://forum.dsmg600.info/t155-Power-usage.html
i was bored while watching my DNS-323 sit there. So I thought I see how much power it really uses. Pulled these from my UPS monitoring software, seems fairly consistant on a number of runs. This is with two Seagate 320gb drives. off 0 watts (ya think?) Initial boot, pre-disk spinup 16 watts Initial boot disk spinup 63 watts Idle with disk spinning 16 watts Web access 16 watts (no change from idle) reading/writing files 31-39 watts variable printing small files 16 watts (no change from idle) printing large files 31 watts (spool to disk?) Idle w/ disk in power save 8 watts
Suggestion for update of the specs on the main page:
Specification
CPU | 500 Mhz Marvell 88F5181 proprietary Feroceon ARM CPU architecture | |||
---|---|---|---|---|
RAM | 2x 32 MB Nanya NT5DS16M16CS-6K | |||
Flash ROM | 8 MB Spansion S29GL064M90TFIR4 | |||
USB | 1 port USB2.0 | |||
IDE controller | Marvell 88X7042 | |||
LAN | Marvell 88E1111 | |||
Cooling | Speed controlled 40 mm fan | |||
Serial | 115200 8N1 TTL | |||
Firmware specs | 1.01 | 1.02 | 1.03 | 1.04 |
Bootloader | U-Boot 1.1.1 | ? | ||
Stock kernel | Linux-2.6.6 | Linux- 2.6.12.6 | ||
Stock C library | uClibc 0.9.28 | ? | ||
Busybox | v1.00-pre1 | |||
Samba | 2.2.8a | 3.0.24 | ||
Benchmarks | DNS-323 benchmarks |
DLINK DNS-323 it Conceptronic CH3SNAS?
Link added and its a clone device — sala 2007/10/17 14:55
Consider updating the memory section on the main page. I looked it up at Nanya and it should be 2 X 256 MB NT5DS16M16CS-6K chips (each chip is 16 X 16 MB) – Also the link on the memory is dead.
The optware discussion could use a howto page, anyone agree?
optware created fonz 2008/04/09
Suggestion for update of the specs on the main page:
Specification
CPU | 500 Mhz Marvell 88F5181 proprietary Feroceon ARM CPU architecture | |||||
---|---|---|---|---|---|---|
RAM | 2x 32 MB Nanya NT5DS16M16CS-6K | |||||
Flash ROM | 8 MB Spansion S29GL064M90TFIR4 | |||||
USB | 1 port USB2.0 | |||||
IDE controller | Marvell 88X7042 | |||||
LAN | Marvell 88E1111 | |||||
Cooling | Speed controlled 40 mm fan | |||||
Serial | 115200 8N1 TTL | |||||
Firmware specs | 1.01 | 1.02 | 1.03 | 1.04 | 1.05 | 1.06 |
Bootloader | U-Boot 1.1.1 | U-Boot 1.7.3 | U-Boot 1.7.3-5182 | ? | ||
Kernel | Linux-2.6.6 | Linux- 2.6.12.6 | ||||
C library | uClibc 0.9.28 | |||||
Busybox | v1.00-pre1 | |||||
Samba | 2.2.8a | 3.0.24 | ||||
Benchmarks | DNS-323 benchmarks |
The DNS-321 should be mentioned near the top of the main page, with an external link to: http://www.dlink.com/DNS-321/. – Bering, July 2009
Some notes on how to get iptables to function: http://wiki.dns323.info/talk:wiki:user:butibum
This could form the basis of a new howto? – Martin, June 2009
yes, it is — sala 2009/12/04 12:32
Maybe mention that even though it looks like a toaster, its two slots are not intended for bread? – Rye, Nov 2009
Well, 88F5181 cpu can go up to pretty high temperatures. — sala 2009/12/04 12:33
New suggestions
new suggestions go down here.
There are two new Firmwares available: 1.07 and 1.08. Could someone please update the start page? The spec of 1.08 follows.
Firmware specs: 1.08, Bootloader: (unkonwn, how can this be evaluated? By serial only?), Kernel: Linux- 2.6.12.6 (unchanged), C library: 0.9.28 (unchanged), Busybox: v1.12.1, Samba: 3.0.24 (unchanged). Major new features: ext3 and add-ons (nfs etc)
Option chart updates would be great :)