Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Just purchased the DNS-323 with 2 WD4000YR (400 GB). I upgraded the firmware to the latest version and I tried to format in RAID1. It only leave me the choice of formatting 148 GB. It basically does not see that it's a 400GB drive. I tried anyway to format and while it hangs for a couple of seconds at 94%, format does complete. I checked the status and indeed it says 148 GB. I tried to use the drive and it is working fine. Thinking that one drive could be bad, I then took one and formated the other one by itself ... 148 GB. Did the same operation with the other drive ... same result ! I could not find one post related to this issue. Anyone has an idea ? Help is GREATLY appreciated.
Offline
Please use the search function! It's a known problem, no need for another thread. See,e.g.
http://dns323.kood.org/forum/t767.html
http://dns323.kood.org/forum/t517-forma … -stop.html
Offline
Like I said mine does complete and say SUCCESSFUL 100% ! I spent a few hours looking for the EXACT same problem but could not fine anything. We are only helping each others here so I don't think there is a need to be aggressive.
Offline
AbeoSystems wrote:
SUCCESSFUL 100% !
Sorry, missed that part. I haven't heard of that specific problem before. Problems with various disk models have been reported before, though, and I wouldn't be surprised if it's just another incompatible hard drive. There's an 'official' list of supported drives somewhere on a dlink site. Have you found/checked it? If it's not on the list, I think the least pain for you is it to try a different model. There's a thread about working disks here: http://dns323.kood.org/forum/t131-What- … NS323.html
Offline