DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#101 2008-04-30 01:32:14
#102 2008-04-30 02:42:22
- metronet
- Member
- Registered: 2007-06-14
- Posts: 8
Re: Transmission & Clutch on CH3SNAS/DNS-323
Thanks again KyleK.
I installed the new version and it's rocking so far.
Offline
#103 2008-04-30 03:35:20
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
Nasp wrote:
Hello people
I use funplug 0.4 and Transmission 1.06, but torrents bigger than 10GB dont work....
1.06 is oooold. Use the one I released just some hours ago.
Offline
#104 2008-04-30 16:58:44
- n0d3
- New member
- Registered: 2008-04-30
- Posts: 3
Re: Transmission & Clutch on CH3SNAS/DNS-323
I keep getting the error message also:
Solved it by following what the rest suggested: echo /mnt/HD_a2/.transmission/daemon/socket > /mnt/HD_a2/www/pages/clutch/remote/data/socket.txt
Any idea why is this happening? Did I mess up the installation? Followed Kyle's instructions step by step.
Offline
#105 2008-04-30 17:20:34
- quekky
- Member
- Registered: 2008-03-30
- Posts: 20
Re: Transmission & Clutch on CH3SNAS/DNS-323
I simply edit the socket.txt file using notepad and put in /mnt/HD_a2/.transmission/daemon/socket
Offline
#106 2008-05-01 15:40:29
- greg1977
- Member
- Registered: 2008-04-28
- Posts: 19
Re: Transmission & Clutch on CH3SNAS/DNS-323
Hello, I think I made a good installation following the tutorial. Clutch is launching from my browser, transmission is running.
However, just after a download starts, clutch shows the error "Permission denied"...
Anyone to help me ?
thank you
Offline
#107 2008-05-01 16:38:04
- rap
- Member
- From: Reading - UK
- Registered: 2008-02-28
- Posts: 119
Re: Transmission & Clutch on CH3SNAS/DNS-323
greg1977 wrote:
Hello, I think I made a good installation following the tutorial. Clutch is launching from my browser, transmission is running.
However, just after a download starts, clutch shows the error "Permission denied"...
Anyone to help me ?
thank you
Did you set up the location to download to in the Clutch preferences ? If so does the location have the correct permissions?
RAP
Offline
#108 2008-05-01 17:41:08
- greg1977
- Member
- Registered: 2008-04-28
- Posts: 19
Re: Transmission & Clutch on CH3SNAS/DNS-323
Ok. thank you. It works...
Is it possible to select different directories per torrent ?
Offline
#109 2008-05-03 16:45:35
- kenyloveg
- Member
- Registered: 2008-04-10
- Posts: 41
Re: Transmission & Clutch on CH3SNAS/DNS-323
Hi, Kylek
The download link for Transmission in this thread looks broken, server return 404 error.
Can you compile the latest build but with turtle icon (speed limit) enabled and reupload?
Thanks you.
Offline
#110 2008-05-03 23:06:16
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
kenyloveg wrote:
Hi, Kylek
The download link for Transmission in this thread looks broken, server return 404 error.
Can you compile the latest build but with turtle icon (speed limit) enabled and reupload?
Thanks you.
I deleted the old releases after an update, but I forgot to mention this in the first post. Post updated, the links should work again.
As far as I can tell, the Turtle functionality was deactivated because of a bug. I don't know anything more about it.
Offline
#111 2008-05-04 01:38:12
Re: Transmission & Clutch on CH3SNAS/DNS-323
KyleK wrote:
Nasp wrote:
Hello people
I use funplug 0.4 and Transmission 1.06, but torrents bigger than 10GB dont work....1.06 is oooold. Use the one I released just some hours ago.
Kylek, tks for compiled version of transmission
Now i have FFP0.5 and Transmission 1.11 runing on my NAS ( CH3snas), but the problem persists, from Clutch interface dont load torrents bigger than 10GB.
All works fine, downloads and uploads speed..etc..etc, but i cant load torrent files bigger than 10GB, also i have put the torrent in /.transmission/torrents and nothing....
any help ?
Tks.
Offline
#112 2008-05-04 02:18:49
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
Tthat's not much of an error description.
What exactly happens?
Does Clutch provide an error message?
What if you load the torrent via transmission-remote:
Code:
transmission-remote -a <torrentfile>
Does that work?
If the torrent file itself is rather large (>128kb) then lighttpd/PHP might be the culprit. I need more info to go on this.
Offline
#113 2008-05-04 02:54:57
Re: Transmission & Clutch on CH3SNAS/DNS-323
Clutch dont load the torrent,Clutch stop......... just try yourself it a bigger torrent if you have time, you ill see.
The torrent file is smaller than 128kb....
Last edited by Nasp (2008-05-04 03:08:13)
Offline
#114 2008-05-04 11:20:49
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
I don't have access to such large torrents. I suggest you go over to the Clutch/Transmission forums at http://forum.transmissionbt.com
Offline
#115 2008-05-04 14:41:15
Re: Transmission & Clutch on CH3SNAS/DNS-323
KyleK wrote:
I don't have access to such large torrents. I suggest you go over to the Clutch/Transmission forums at http://forum.transmissionbt.com
well
in telnet with transmission-remote -a works!!!!
Great Problem solved.
tks for the help.
Offline
#116 2008-05-04 16:39:57
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
Then it is either a problem with Clutch or lighttpd. Check your lighttpd error.log
Offline
#117 2008-05-04 21:59:13
Re: Transmission & Clutch on CH3SNAS/DNS-323
greg1977 wrote:
Ok. thank you. It works...
Is it possible to select different directories per torrent ?
In Clutch, you have one working directory, but if you keep seed or download torrents, you also may change the directorie for new torrents, transmission keep the old torrents on the old directories, i have test, also i restart the transmission and the NAS, it Works.
Just Change the directorie in Clutch Preferences before the new torrents.
Offline
#118 2008-05-04 23:43:37
- greg1977
- Member
- Registered: 2008-04-28
- Posts: 19
Re: Transmission & Clutch on CH3SNAS/DNS-323
Nasp wrote:
greg1977 wrote:
Ok. thank you. It works...
Is it possible to select different directories per torrent ?In Clutch, you have one working directory, but if you keep seed or download torrents, you also may change the directorie for new torrents, transmission keep the old torrents on the old directories, i have test, also i restart the transmission and the NAS, it Works.
Just Change the directorie in Clutch Preferences before the new torrents.
Ok thank you very much. I will try
Offline
#119 2008-05-05 06:05:59
- headman
- Member
- Registered: 2008-03-09
- Posts: 17
Re: Transmission & Clutch on CH3SNAS/DNS-323
Nasp wrote:
Clutch dont load the torrent,Clutch stop......... just try yourself it a bigger torrent if you have time, you ill see.
The torrent file is smaller than 128kb....
Try adding server.upload-dirs = ("/mnt/HD_a2/tmp") to lighttpd.conf, does it help?
Offline
#120 2008-05-05 08:23:26
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
headman wrote:
Nasp wrote:
Clutch dont load the torrent,Clutch stop......... just try yourself it a bigger torrent if you have time, you ill see.
The torrent file is smaller than 128kb....Try adding server.upload-dirs = ("/mnt/HD_a2/tmp") to lighttpd.conf, does it help?
And don't forget to create that directory :)
Offline
#121 2008-05-06 00:48:01
#122 2008-05-06 17:46:47
- Levis
- Member
- Registered: 2008-05-06
- Posts: 40
Re: Transmission & Clutch on CH3SNAS/DNS-323
Proxy features still not included in transmission? 
Offline
#123 2008-05-07 13:52:43
- KyleK
- Member
- From: Dresden, Germany
- Registered: 2007-12-05
- Posts: 1178
Re: Transmission & Clutch on CH3SNAS/DNS-323
I'd say the first post is a start 
Although those are more recent builds of Transmission checked out via SVN. I have them running for weeks and no problems so far.
Offline
#124 2008-05-09 23:48:30
- vedeja
- Member
- Registered: 2008-02-21
- Posts: 161
Re: Transmission & Clutch on CH3SNAS/DNS-323
A new version (1.20) of Transmission is out. I would be great if someone could compile it for the DNS.
¤ 2 x 500 GB Samsung Spinpoint ¤ FFP 0.5 ¤ Custom fanscript ¤
¤ Lighttpd 1.4.19 ¤ Transmission 1.50 ¤ FW 1.07 ¤
Offline
#125 2008-05-10 00:57:22
Re: Transmission & Clutch on CH3SNAS/DNS-323
vedeja wrote:
A new version (1.20) of Transmission is out. I would be great if someone could compile it for the DNS.
ahh, and have BlockList suport....now with 1.20 version...... amazing.
it is a question a time, free time, for Kylek compile this new version... i think.
Last edited by Nasp (2008-05-10 01:28:30)
Offline