DSM-G600, DNS-3xx and NSA-220 Hack Forum
Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Announcement
IRC Channel #funplug on irc.freenode.org
#1 2008-12-08 10:44:15
- overrun
- New member
- Registered: 2008-12-08
- Posts: 3
ssh problem
my dns-323 config:
fw: 1.05
ffp: 0.5
using transmission 1.40
problem: SSH gives me a busybox prompt and I can't do anything with it... please help!
Offline
#2 2008-12-08 14:04:50
- luusac
- Member
- Registered: 2008-04-29
- Posts: 360
Re: ssh problem
you are using the f/w busybox and not the later version in ffp 0.5. My copy of ffp has busybox 1.10.1
Offline
#3 2008-12-08 15:33:51
- overrun
- New member
- Registered: 2008-12-08
- Posts: 3
Re: ssh problem
do you know how to update or replace the busybox?
Offline
#4 2008-12-08 15:36:21
Re: ssh problem
overrun wrote:
do you know how to update or replace the busybox?
Offline
#5 2008-12-08 17:01:33
- overrun
- New member
- Registered: 2008-12-08
- Posts: 3
Re: ssh problem
thanks fonz... that worked!!!
Last edited by overrun (2008-12-08 17:17:33)
Offline
#6 2008-12-10 16:09:58
- PeterZ
- Member
- From: Bratislava, Slovakia
- Registered: 2008-11-10
- Posts: 10
Re: ssh problem
You can even change shell entry for your user in /etc/passwd file.
By default is there ash shell, which needs activation code 5784468.
I suggest:
0. telnet <your_DNS-323_IP_address>
1. vipw /etc/passwd
2. find user records and change shell
3. :wq!
4. store-passwd.sh
Cheers,
Peter
Last edited by PeterZ (2008-12-10 16:10:39)
DNS-323 • 2x WD RE3 (WD5002ABYS) SATAII 7200RPM 16MB • RAID1 • FW1.10 • ext2
Offline
#7 2008-12-10 16:26:48
- puterboy
- Member
- Registered: 2008-09-18
- Posts: 306
Re: ssh problem
Is there a user way to change the activation code?
How 'secure' is this code (if kept secret)?
Offline
#8 2008-12-11 14:25:33
- PeterZ
- Member
- From: Bratislava, Slovakia
- Registered: 2008-11-10
- Posts: 10
Re: ssh problem
I suppose it's hardcoded in some piece of code. Source codes are available so can have a look on it.
For me is better to use bash instead of ash.
Cheers,
Peter
DNS-323 • 2x WD RE3 (WD5002ABYS) SATAII 7200RPM 16MB • RAID1 • FW1.10 • ext2
Offline
#9 2008-12-15 09:49:12
- puterboy
- Member
- Registered: 2008-09-18
- Posts: 306
Re: ssh problem
oh I definitely use bash - just was curious where the code came from and whether it is compiled in or set in a more accessible place.
Offline
#10 2009-01-15 09:27:59
- Fry
- Member
- Registered: 2009-01-15
- Posts: 6
Re: ssh problem
Hi,
I am having the same issue, I read the docs, but I am a newbie *nix user
Here is what i get
BusyBox v1.00-pre1 (2008.09.02-11:43+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
5784468
# chsh -s /ffp/bin/sh root
chsh: No such file or directory
Which part of the docs are relevent to this?
Why is the chsh command not found?
Thanks
Offline