DSM-G600, DNS-3xx and NSA-220 Hack Forum

Unfortunately no one can be told what fun_plug is - you have to see it for yourself.

You are not logged in.

Announcement

#1 2008-10-05 19:15:09

rooney
Member
Registered: 2008-09-02
Posts: 6

Web access not possible anymore

Strange things are going on...

Obviously I don't have access to the administration webpage of my DNS-323 anymore. I'm not sure but I believe there was a folder on my Volume_1 where a webpage was located. This folder seems to be disappeared.
Does anyone have a suggestion how to access the administration page again?

Thanks a lot!!!!

Rooney

Offline

 

#2 2008-10-05 20:46:18

luusac
Member
Registered: 2008-04-29
Posts: 360

Re: Web access not possible anymore

rooney wrote:

I'm not sure but I believe there was a folder on my Volume_1 where a webpage was located. This folder seems to be disappeared.

No, the admin pages are not stored there, so you have not accidentally deleted them.

how are you trying to access the admin page (ip address or hostname)? 
has anything changed on your network setup?
can you ping the nas?
can you access vol_1 using your usual method ?

I am assuming that rebooting / shutting down/restarting the unit doesn't bring the web interface back.
lu

Last edited by luusac (2008-10-05 22:52:13)

Offline

 

#3 2008-10-05 23:26:49

rooney
Member
Registered: 2008-09-02
Posts: 6

Re: Web access not possible anymore

I'm accessing via easy search from DLINK and browser + IP, but it doesn't work.

When I'm typing <ip>/web it works... Maybe there was a link that was deleted?

Reboot doesn't work.

I'm using firmware 1.05 and fun_plug.

Offline

 

#4 2008-10-06 02:31:16

luusac
Member
Registered: 2008-04-29
Posts: 360

Re: Web access not possible anymore

rooney wrote:

I'm accessing via easy search from DLINK and browser + IP, but it doesn't work.
When I'm typing <ip>/web it works... Maybe there was a link that was deleted?

The whole web interface is stored in flash - you can't delete them.  None of it is stored on your hdd - which is why you can access the web interface even when there are no hdds in the unit.

You say that browser + ip doesn't work but browser + ip/web does work ?

You could try a factory reset (restore default config) or reflashing with 1.05 or 1.04 f/w.  Have you taken any of the drives out recently or swapped them, or has this 'just happened'?  Have you another webserver running on the box?
lu

Offline

 

#5 2009-01-05 20:36:52

mamurao
New member
Registered: 2008-12-18
Posts: 4

Re: Web access not possible anymore

hello all,

I am having the same issue here after i have queued up about 8 or so torrent downloads. when i hit the webgui i get this error. I did not restart yet but i can access via ftp  and through the map drive on xp. I verified that the downloads are complete though after 5-6 hrs.

anyone have any ideas?

here's the error

Access Error: Site or Page Not Found
when trying to obtain /web/login.asp?id=8602385

Cannot open URL

Offline

 

#6 2009-01-05 21:11:40

jeff777
Member
Registered: 2007-05-25
Posts: 15

Re: Web access not possible anymore

mamurao wrote:

hello all,

I am having the same issue here after i have queued up about 8 or so torrent downloads. when i hit the webgui i get this error. I did not restart yet but i can access via ftp  and through the map drive on xp. I verified that the downloads are complete though after 5-6 hrs.

anyone have any ideas?

here's the error

Access Error: Site or Page Not Found
when trying to obtain /web/login.asp?id=8602385

Cannot open URL

I have the exact same issue whenever the number of active torrents on my DNS-323 add up to at least 5 or more.

Offline

 

#7 2009-01-05 21:25:06

jeangb
Member
Registered: 2009-01-05
Posts: 10

Re: Web access not possible anymore

I'm a newbie but I did have this issue (not accessing the NAS after bitorrent a few files) with 1.05. I shutdown the NAS, unplug for 1 min, plug the power cord and power on the unit. All things came back as usual. Hope this will help.

Offline

 

#8 2009-01-05 21:26:55

mamurao
New member
Registered: 2008-12-18
Posts: 4

Re: Web access not possible anymore

Forgot to say that i just upgraded to 1.06, did not try it on the older 1.05 firmware but ps3 upnp is now fixed big time. very good streaming now . but another one to research now , i can reboot the dns-323

Offline

 

#9 2009-01-08 20:54:10

rmohid
Member
Registered: 2009-01-08
Posts: 5

Re: Web access not possible anymore

I'm having a similar problem.. here is a sequence of events

1) Had 1.03 running with fun_plug 0.5 .. updated flash with new shadow password file for diff user acces
2) lighttpd, ajaxtem,  transmission/clutch installed, all working
3) 2 volumes mounted with extfs2, no raid used

4) Upgraded to 1.05 ... web interface seemed to update  ok, put would not display the new version after reboot.. tried it again 2 times
5) Manually rebooted DNS-323, ALMOST everything came back up fine, Upnp and streaming seems to works as well for my PS3, so I'm assuming 1.05 was loaded
6) builtin web server will NOT load, port not open, old url invalid, but ftp, telnet, lighttpd and everything else still works

7) tried to run webs ranually on unit, it core dumped (where do the core dumps go?) after complaining of "Quota exceeded" or something. Tried to disable user quotas and restarting webs, but same error

8) tried physically swaping volumes and rebooting, only 1 volume, etc but no web access.

9) tried nuking tasks that were resource intensive, like ajax-python, clutch, to free up resources to restart webs .. but no luck

10) Got desperate, installed cleanboot and tried again to get webs up

11) Found file system errors in dmsg.out, ran efsck and fixed them on both volumes.. still no luck after reboot

btw, lighttpd is using port 8080, which didn't conflict with 1.03 web access. What should the default port be? I'm assuming it should still be 80 for the internal web server.

The auto-find tool has been useless to fix this, tried many versions of it , new and old.

Is there a way to reflash with 1.06 without using kermit over a serial link? Any ideas on why the builtin webserver won't start ?

any logs I can pull that would provide useful info ?

Last edited by rmohid (2009-01-08 21:07:23)

Offline

 

#10 2009-01-09 01:30:14

mig
Member
From: Seattle, WA
Registered: 2006-12-21
Posts: 532

Re: Web access not possible anymore

another person just had a web GUI won't start problem take a look at
this post http://dns323.kood.org/forum/t3576-acce … -edit.html

if that doesn't help, please post the output of the /web/webs command


DNS-323 • 2x Seagate Barracuda ES 7200.10 ST3250620NS 250GB SATAII (3.0Gb/s) 7200RPM 16MB • RAID1 • FW1.03 • ext2 
Fonz's v0.3 fun_plug http://www.inreto.de/dns323/fun-plug

Offline

 

#11 2009-01-09 17:47:17

rmohid
Member
Registered: 2009-01-08
Posts: 5

Re: Web access not possible anymore

Good thread.. i'll give the suggestions a try.

Offline

 

#12 2009-01-11 04:46:17

rmohid
Member
Registered: 2009-01-08
Posts: 5

Re: Web access not possible anymore

My ddns.conf was truncated, replacing it did the trick.
But I seem to have size issues on one of my mounted filesystems, this is what I got when I tried to save my ddnf.conf via the web interface


rm: cannot remove `/tmp/get_magic_number_ok': No such file or directory
rm: cannot remove `/tmp/get_magic_number_error': No such file or directory
support web file server upload.
support web file server upload.
rm: cannot remove `/tmp/set_ddns_done': No such file or directory
rm: cannot remove `/tmp/set_ddns_error': No such file or directory
rm: cannot remove `/web/ddns_start': No such file or directory
cp: Write Error: No space left on device
support web file server upload.


I'm sure this has been seen elsewhere.. wasn't there a comment about 1.05 and 1.06 being larger than 1.04 ?

Offline

 

#13 2009-01-11 08:34:06

mig
Member
From: Seattle, WA
Registered: 2006-12-21
Posts: 532

Re: Web access not possible anymore

I did see the errors about "magic_number -- No such file" in the
telnet window when I restarted 'webs' manually.  However, when
I rebooted the DNS-323 the web GUI and ddns pages seem to be fine.

Do you see any problems after reboot?

Last edited by mig (2009-01-11 08:38:42)


DNS-323 • 2x Seagate Barracuda ES 7200.10 ST3250620NS 250GB SATAII (3.0Gb/s) 7200RPM 16MB • RAID1 • FW1.03 • ext2 
Fonz's v0.3 fun_plug http://www.inreto.de/dns323/fun-plug

Offline

 

#14 2009-01-11 21:00:04

rmohid
Member
Registered: 2009-01-08
Posts: 5

Re: Web access not possible anymore

Yes, I seem to have problems saving any setting via the web interface.. it looks like there's some kind of issue saving to flash.

Rebooting via the web interface or by >reboot  hangs the system with 2 purple disks. Hoilding down the power button will clear this however.

This is what I see running from the console after a reboot with 1.06, newly updated (with various stuff from ffp 0.5)

/ # ps -elf
  PID  Uid     VmSize Stat Command
    1 root        296 S   init
    2 root            SWN [ksoftirqd/0]
    3 root            SW< [events/0]
    4 root            SW< [khelper]
    5 root            SW< [kthread]
   11 root            SW< [kblockd/0]
   14 root            SW  [khubd]
   49 root            SW  [pdflush]
   50 root            SW  [pdflush]
   52 root            SW< [aio/0]
   51 root            SW  [kswapd0]
  190 root            SW  [scsi_eh_0]
  191 root            SW  [scsi_eh_1]
  192 root            SW  [scsi_eh_2]
  193 root            SW  [scsi_eh_3]
  204 root            SW  [mtdblockd]
  218 root            SW< [kcryptd/0]
  219 root            SW< [kmirrord/0]
  230 root            SW< [loop0]
1404 root        256 S   atd
1409 root       2052 S   smbd -D
1411 root       1268 S   nmbd -D
1418 root       2048 S   smbd -D
1440 root        324 S   crond
1653 root        356 S   chkbutton
1680 root        184 S   fancontrol
1764 root        460 S   lpd Waiting
1789 root        332 S   op_server 0 0 0
1796 root        308 S   -sh
1851 root        344 S   /ffp/sbin/syslogd
1861 root        328 S   /ffp/sbin/klogd -c 3
1874 root        264 S   /ffp/sbin/rpc.portmap
1895 nobody     2736 S   /ffp/bin/transmission-daemon -f
1910 nobody     2736 S   /ffp/bin/transmission-daemon -f
1911 nobody     2736 S   /ffp/bin/transmission-daemon -f
1914 root       1076 S   /ffp/sbin/sshd
1925 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1926 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1932 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1940 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1942 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1944 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1945 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1948 root        940 S   /ffp/sbin/lighttpd -f /ffp/etc/lighttpd.conf
1950 root       2760 S   /ffp/bin/php-cgi
1952 root       2760 S   /ffp/bin/php-cgi
1960 root         60 S   /mnt/HD_a2/lnx_bin/utelnetd -l /mnt/HD_a2/lnx_bin/sh
1961 root       2768 S   /ffp/bin/php-cgi
1962 root       2768 S   /ffp/bin/php-cgi
1963 root       4792 S   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1964 root       4792 R   /ffp/bin/mediatomb -d --interface egiga0 --home /ffp/
1986 root        396 S   /mnt/HD_a2/lnx_bin/sh
2021 root        284 R   ps -elf

and my file system is
/ # df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/ram0                 9911      7472      1927  79% /
/dev/loop0                5760      5760         0 100% /sys/crfs
/dev/sda2            480197164  49640824 430556340  10% /mnt/HD_a2
/dev/sdb2            480197164  96736904 383460260  20% /mnt/HD_b2


And here is the output of me manually starting webs

/web # cp /sys/crfs/default/ddns.conf /web; /web/webs
rm: cannot remove `/tmp/set_ddns_done': No such file or directory
rm: cannot remove `/tmp/set_ddns_error': No such file or directory
rm: cannot remove `/web/ddns_start': No such file or directory
$Shutting down SMB services:
$Shutting down NMB services:
$Starting SMB services:
$Starting NMB services:
language=1

# login to webs server...

client_ip = 000.000.000.000
support web file server upload.
rm: cannot remove `/tmp/get_magic_number_ok': No such file or directory
rm: cannot remove `/tmp/get_magic_number_error': No such file or directory

# save a default ddns.conf

support web file server upload.
rm: cannot remove `/tmp/set_ddns_done': No such file or directory
rm: cannot remove `/tmp/set_ddns_error': No such file or directory
rm: cannot remove `/web/ddns_start': No such file or directory
cp: Write Error: No space left on device
support web file server upload.

#trying to activate the builtion upnp server from teh web interface..


support web file server upload.
UPNPAV_MGR: Generate key failed.
UPNPMGR: Get ShareFolder=/mnt/HD_a2/.
UPNPAV_MGR: Generate key failed.
UPNPMGR: Get ShareFolder=/mnt/HD_a2/.
support web file server upload.
support web file server upload.
sh: /bin/upnpscript: not found
UPNPAV_MGR: Generate key failed.
UPNPMGR: Set ShareFolder=/mnt/HD_b2.
SerialNum_a_detect[WD-WMAS80093580]
SerialNum_b_detect[WD-WCAS82735644]
cp: Write Error: No space left on device
cp: Write Error: No space left on device
sh: you need to specify whom to kill
sharefolder /mnt/HD_b2/
count file-->
UPNPAV_MGR: Generate key failed.
UPNPMGR: Get ShareFolder=/mnt/HD_b2.
UPNPAV_MGR: Generate key failed.
UPNPMGR: Get ShareFolder=/mnt/HD_b2.

Offline

 

#15 2009-03-13 10:00:11

armen52
Member
Registered: 2008-02-28
Posts: 9
Website

Re: Web access not possible anymore

Anybody make any progress with this issue? I am seeing very similar (same) types of output at the command prompt as rmohid. I'm also running 1.06 (upgraded from 1.04) and installed ffplug 0.5.

SMB mounts work fine but can't get web admin access. What the heck is the expected output of the /web/webs command? I get what rmohid got.

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2010 PunBB