DSM-G600, DNS-3xx and NSA-220 Hack Forum

cybernauta wrote:

hello,

I need some help setting up my nas 323 and transmission.
I followed the instructions here in the forum and wiki.

I have nas 323 with firmware 1.06 and transmission 1.52.

I installed funplug and transmission following the rules from here.

When I added some torrents to download (some of them um more than 10000 peers), transmission doesnt download anything and doesnt detect any peers.

in attach i send the configuration file and here is the logfile so you can try and help me out please.

----------- LOG -----------

[23:11:26.048] Couldn't create socket: Address family not supported by protocol
[23:11:26.049] RPC Server: Adding address to whitelist: *.*.*.*
[23:11:26.051] RPC Server: Serving RPC and Web requests on port 9091
[23:11:26.052] RPC Server: Whitelist enabled
[23:11:26.052] RPC Server: Password required
[23:11:26.053] Transmission 1.52 (8256) started
[23:11:26.153] transmission-daemon: requiring authentication
[23:11:27.050] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
[23:11:27.051] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
[23:11:37.070] Port Forwarding (UPnP): Found Internet Gateway Device "http://192.168.3.2:50181/"
[23:11:37.070] Port Forwarding (UPnP): Local Address is "192.168.3.2"
[23:11:37.111] Port Forwarding (UPnP): Port forwarding through "http://192.168.3.2:50181/", service "".  (local address: 192.168.3.2:51413)
[23:11:37.111] Port Forwarding: State changed from "Not forwarded" to "Starting"
[23:11:37.112] Port Forwarding: Opened port 51413 on 0.0.0.0 to listen for incoming peer connections
[23:11:37.120] Searching for web interface file "/home/nobody/.local/share/transmission/web/javascript/transmission.js"
[23:11:37.120] Searching for web interface file "/ffp/share/transmission/web/javascript/transmission.js"
[23:12:07.750] Lost.S05E13.HDTV.XviD-NoTV.avi: Couldn't read resume file
[23:12:07.752] Lost.S05E13.HDTV.XviD-NoTV.avi: Queued for verification
[23:12:07.756] Lost.S05E13.HDTV.XviD-NoTV.avi: Verifying torrent
[23:13:35.743] Port Forwarding: State changed from "Starting" to "???"

I have seen the problem. it was not a NAS problem. it was the router that the ISP provided that had (and has) problems with port forwarding. change to a cable modem + my owner router and the issue was solved.

bruor wrote:

stalkingdemon,

also note that you cannot change the download folder for a specific torrent using the CLI, running something like  transmission-remote -t num -w /path    selects the present torrent, but changes the system default download path, leaving the present torrent's download folder where it was.

im a bit confused at that part (im not that bright with computer thingies).

my transmission worked perfectly when i typed in the command you told me.
but when i restart my DNS 323. i will get the same error (no such file or directory)?

any permanent solutions?


"new update: I finally got it to work with the help of my friend.
we edited /mnt/HD_a2/.transmission-daemon/settings.json and chanced the path from there"

thanks for all the help guys! now im a happy user

Last edited by stalkingdemon (2009-04-28 06:57:25)

1.60b1 is out, adding file selection & prioritization to the web client (the ONLY feature that kept me downloading torrents to my PC)! http://forum.transmissionbt.com/viewtop … amp;t=7525

Any chance of getting a build of this?  I attempted to figure out how to build myself...but could't get past a couple errors in the initial ./configure step

aw...

well, perhaps any wisdom on why ./configure is failing?  Any tips would be much appreciated Here's its output...

checking for a BSD-compatible install... /ffp/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... ./install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... no
checking how to create a ustar tar archive... plaintar
checking build system type... ./config.guess: line 840: echo: write error: Broken pipe
armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking for style of include used by make... none
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: in `/mnt/HD_a2/zzCurrent/transmission-1.60b1':
configure: error: C compiler cannot create executables

---and below is the contents of config.log---
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by transmission configure 1.60b1, which was
generated by GNU Autoconf 2.63.  Invocation command line was

  $ ./configure

## --------- ##
## Platform. ##
## --------- ##

hostname = dlink-NAS
uname -m = armv5tejl
uname -r = 2.6.22.7
uname -s = Linux
uname -v = #105 Tue Sep 23 11:36:49 CST 2008

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /ffp/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /ffp/bin
PATH: /usr/bin
PATH: /bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2239: checking for a BSD-compatible install
configure:2307: result: /ffp/bin/install -c
configure:2318: checking whether build environment is sane
configure:2361: result: yes
configure:2386: checking for a thread-safe mkdir -p
configure:2425: result: ./install-sh -c -d
configure:2438: checking for gawk
configure:2468: result: no
configure:2438: checking for mawk
configure:2468: result: no
configure:2438: checking for nawk
configure:2468: result: no
configure:2438: checking for awk
configure:2454: found /ffp/bin/awk
configure:2465: result: awk
configure:2476: checking whether make sets $(MAKE)
configure:2502: result: no
configure:2677: checking how to create a ustar tar archive
configure:2690: tar --version
tar: unrecognized option `--version'
BusyBox v1.12.1 (2008-09-29 20:38:04 CEST) multi-call binary

Usage: tar -[czjaZxtvO] [-X FILE] [-f TARFILE] [-C DIR] [FILE(s)]...

Create, extract, or list files from a tar file

Options:
    c    Create
    x    Extract
    t    List
Archive format selection:
    z    Filter the archive through gzip
    j    Filter the archive through bzip2
    a    Filter the archive through lzma
    Z    Filter the archive through compress
File selection:
    f    Name of TARFILE or "-" for stdin
    O    Extract to stdout
    exclude    File to exclude
    X    File with names to exclude
    C    Change to directory DIR before operation
    v    Verbose

configure:2693: $? = 1
configure:2690: gnutar --version
./configure: line 2691: gnutar: command not found
configure:2693: $? = 127
configure:2690: gtar --version
./configure: line 2691: gtar: command not found
configure:2693: $? = 127
configure:2733: tardir=conftest.dir && eval gtar --format=ustar -chf - "$tardir" >conftest.tar
./configure: line 2734: gtar: command not found
configure:2736: $? = 127
configure:2733: tardir=conftest.dir && eval tar chf - "$tardir" >conftest.tar
configure:2736: $? = 0
configure:2740: tar xf - <conftest.tar
configure:2743: $? = 0
configure:2756: result: plaintar
configure:2841: checking build system type
configure:2859: result: armv5tejl-unknown-linux-gnueabi
configure:2881: checking host system type
configure:2896: result: armv5tejl-unknown-linux-gnueabi
configure:2930: checking for style of include used by make
configure:2958: result: none
configure:3028: checking for gcc
configure:3044: found /ffp/bin/gcc
configure:3055: result: gcc
configure:3287: checking for C compiler version
configure:3295: gcc --version >&5
gcc (GCC) 4.1.3 20080414 (prerelease)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3299: $? = 0
configure:3306: gcc -v >&5
Using built-in specs.
Target: arm-unknown-linux-uclibc
Configured with: /mnt/HD_a2/home/bob/funplug/work/gcc-4.1/gcc-4_1-branch/configure --enable-languages=c,c++ --enable-__cxa_atexit --with-local-prefix=/ffp --disable-multilib --disable-libssp --disable-libgomp --disable-libmudflap --disable-tls --with-float=soft --disable-bootstrap
Thread model: posix
gcc version 4.1.3 20080414 (prerelease)
configure:3310: $? = 0
configure:3317: gcc -V >&5
gcc: '-V' option must have argument
configure:3321: $? = 1
configure:3344: checking for C compiler default output file name
configure:3366: gcc    conftest.c  >&5
gcc: error trying to exec 'as': execvp: No such file or directory
configure:3370: $? = 1
configure:3408: result:
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME "transmission"
| #define PACKAGE_TARNAME "transmission"
| #define PACKAGE_VERSION "1.60b1"
| #define PACKAGE_STRING "transmission 1.60b1"
| #define PACKAGE_BUGREPORT "http://trac.transmissionbt.com/newticket"
| #define PACKAGE "transmission"
| #define VERSION "1.60b1"
| /* end confdefs.h.  */
|
| int
| main ()
| {
|
|   ;
|   return 0;
| }
configure:3414: error: in `/mnt/HD_a2/zzCurrent/transmission-1.60b1':
configure:3417: error: C compiler cannot create executables
See `config.log' for more details.

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=armv5tejl-unknown-linux-gnueabi
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_DBUS_GLIB_CFLAGS_set=
ac_cv_env_DBUS_GLIB_CFLAGS_value=
ac_cv_env_DBUS_GLIB_LIBS_set=
ac_cv_env_DBUS_GLIB_LIBS_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_GIO_CFLAGS_set=
ac_cv_env_GIO_CFLAGS_value=
ac_cv_env_GIO_LIBS_set=
ac_cv_env_GIO_LIBS_value=
ac_cv_env_GTK_CFLAGS_set=
ac_cv_env_GTK_CFLAGS_value=
ac_cv_env_GTK_LIBS_set=
ac_cv_env_GTK_LIBS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBCURL_CFLAGS_set=
ac_cv_env_LIBCURL_CFLAGS_value=
ac_cv_env_LIBCURL_LIBS_set=
ac_cv_env_LIBCURL_LIBS_value=
ac_cv_env_LIBNOTIFY_CFLAGS_set=
ac_cv_env_LIBNOTIFY_CFLAGS_value=
ac_cv_env_LIBNOTIFY_LIBS_set=
ac_cv_env_LIBNOTIFY_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_OPENSSL_CFLAGS_set=
ac_cv_env_OPENSSL_CFLAGS_value=
ac_cv_env_OPENSSL_LIBS_set=
ac_cv_env_OPENSSL_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=armv5tejl-unknown-linux-gnueabi
ac_cv_path_install='/ffp/bin/install -c'
ac_cv_prog_AWK=awk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=no
am_cv_prog_tar_ustar=plaintar

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run aclocal-1.10'
ALL_LINGUAS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run tar'
AR=''
AUTOCONF='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run autoconf'
AUTOHEADER='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run autoheader'
AUTOMAKE='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run automake-1.10'
AWK='awk'
BUILD_CLI_FALSE=''
BUILD_CLI_TRUE=''
BUILD_DAEMON_FALSE=''
BUILD_DAEMON_TRUE=''
BUILD_GTK_FALSE=''
BUILD_GTK_TRUE=''
BUILD_MAC_FALSE=''
BUILD_MAC_TRUE=''
CATALOGS=''
CATOBJEXT=''
CC='gcc'
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CURL_MINIMUM=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
CYGPATH_W='echo'
DATADIRNAME=''
DBUS_BINDING_TOOL=''
DBUS_GLIB_CFLAGS=''
DBUS_GLIB_LIBS=''
DBUS_GLIB_MINIMUM=''
DEFS=''
DEPDIR='.deps'
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
F77=''
FFLAGS=''
GETTEXT_PACKAGE=''
GIO_CFLAGS=''
GIO_LIBS=''
GIO_MINIMUM=''
GLIB_MINIMUM=''
GMOFILES=''
GMSGFMT=''
GREP=''
GTK_CFLAGS=''
GTK_LIBS=''
GTK_MINIMUM=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
INSTOBJEXT=''
INTLLIBS=''
INTLTOOL_CAVES_RULE=''
INTLTOOL_DESKTOP_RULE=''
INTLTOOL_DIRECTORY_RULE=''
INTLTOOL_EXTRACT=''
INTLTOOL_KBD_RULE=''
INTLTOOL_KEYS_RULE=''
INTLTOOL_MERGE=''
INTLTOOL_OAF_RULE=''
INTLTOOL_PERL=''
INTLTOOL_POLICY_RULE=''
INTLTOOL_PONG_RULE=''
INTLTOOL_PROP_RULE=''
INTLTOOL_SCHEMAS_RULE=''
INTLTOOL_SERVER_RULE=''
INTLTOOL_SERVICE_RULE=''
INTLTOOL_SHEET_RULE=''
INTLTOOL_SOUNDLIST_RULE=''
INTLTOOL_THEME_RULE=''
INTLTOOL_UI_RULE=''
INTLTOOL_UPDATE=''
INTLTOOL_XAM_RULE=''
INTLTOOL_XML_NOMERGE_RULE=''
INTLTOOL_XML_RULE=''
LDFLAGS=''
LIBCURL_CFLAGS=''
LIBCURL_LIBS=''
LIBEVENT_CPPFLAGS=''
LIBNOTIFY_CFLAGS=''
LIBNOTIFY_LIBS=''
LIBNOTIFY_MINIMUM=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /mnt/HD_a2/zzCurrent/transmission-1.60b1/missing --run makeinfo'
MKDIR_P='./install-sh -c -d'
MKINSTALLDIRS=''
MSGFMT=''
MSGMERGE=''
NMEDIT=''
OBJEXT=''
OPENSSL_CFLAGS=''
OPENSSL_LIBS=''
OPENSSL_MINIMUM=''
PACKAGE='transmission'
PACKAGE_BUGREPORT='http://trac.transmissionbt.com/newticket'
PACKAGE_NAME='transmission'
PACKAGE_STRING='transmission 1.60b1'
PACKAGE_TARNAME='transmission'
PACKAGE_VERSION='1.60b1'
PATH_SEPARATOR=':'
PEERID_PREFIX='-TR152X-'
PKG_CONFIG=''
POFILES=''
POSUB=''
PO_IN_DATADIR_FALSE=''
PO_IN_DATADIR_TRUE=''
PTHREAD_CC=''
PTHREAD_CFLAGS=''
PTHREAD_LIBS=''
RANLIB=''
SED=''
SET_MAKE='MAKE=make'
SHELL='/ffp/bin/bash'
STRIP=''
TR_UNSTABLE_FALSE=''
TR_UNSTABLE_TRUE=''
USERAGENT_PREFIX='1.60b1'
USE_NLS=''
VERSION='1.60b1'
WIN32_FALSE=''
WIN32_TRUE=''
WINDRES=''
WX_MINIMUM=''
XGETTEXT=''
ZLIB_CFLAGS=''
ZLIB_LDFLAGS=''
ZLIB_LIBS=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_F77=''
acx_pthread_config=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include='#'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='tar chf - "$$tardir"'
am__untar='tar xf -'
bindir='${exec_prefix}/bin'
build='armv5tejl-unknown-linux-gnueabi'
build_alias=''
build_cpu='armv5tejl'
build_os='linux-gnueabi'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='armv5tejl-unknown-linux-gnueabi'
host_alias=''
host_cpu='armv5tejl'
host_os='linux-gnueabi'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /mnt/HD_a2/zzCurrent/transmission-1.60b1/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(top_builddir)/./install-sh -c -d'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
subdirs=''
sysconfdir='${prefix}/etc'
target_alias=''
transmissionlocaledir=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_NAME "transmission"
#define PACKAGE_TARNAME "transmission"
#define PACKAGE_VERSION "1.60b1"
#define PACKAGE_STRING "transmission 1.60b1"
#define PACKAGE_BUGREPORT "http://trac.transmissionbt.com/newticket"
#define PACKAGE "transmission"
#define VERSION "1.60b1"

configure: exit 77

Request for kylek.... can you please compile version 1.60 it has useful improvements specially on webclient

thanks

Apparently it adds file selection & prioritization, which is absolutely crucial

LuckyBlack wrote:

Request for kylek.... can you please compile version 1.60 it has useful improvements specially on webclient

thanks

His website is still down (download link in first post) and he hasn't posted since april 19. Perhaps he's on a holiday?

nyunyu wrote:

Kylek, is it normal when typing "transmission-remote -l" gave this message?
root@dlink-0A78F3:/mnt/HD_a2/ffp/var/scripts# transmission-remote -l
[00:14:33.785] JSON parser failed at line 1, column 1: "<h1>401: Unautho"
[00:14:33.789] transmission-remote: Unable to parse response "<h1>401: Unauthorized</h1>Unauthorized User"

You have authentication turned on. You should use the -n option like this:
# transmission-remote -n username:password -l

For 1.60, be aware of http://trac.transmissionbt.com/ticket/2030

Hey guys,

yes, I was on vacation for 2 weeks. Did I not mention that? I'm sorry, I totally intended to post something. 1.60 is compiling right now, but I still want to go through the changes and see if any issues crept up. I'll keep you guys posted.

Hey Kylek, it looks like your site is down.....

nohelp wrote:

Hey Kylek, it looks like your site is down.....

Should be up again. I did some server maintenance (and might have to do some more tonight/tomorrow), so if you find the server down just try again a bit later.