DSM-G600, DNS-3xx and NSA-220 Hack Forum

I've spent the last several days scouring the net in search of a good, clear-cut explanation of how to do this, but I'm still more confused than anything (I bet I could hook up an external drive to it now, though ). I DO have fun_plug installed, and I DO have SSH access, but that's about as far as I've gotten. Could someone please help me?

The two printers are a Brother HL-1430 and a HP Photosmart 1215 (which, as far as I know, aren't GDI printers -- which is less complicated, right?) on a USB 1.0 hub.

Here' my dmesg:

usb 1-1: new full speed USB device using ehci_platform and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
usb 1-1.2: new full speed USB device using ehci_platform and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 pr     oto 2 vid 0x0B39 pid 0x0801
usb 1-1.3: new full speed USB device using ehci_platform and address 4
usb 1-1.4: new full speed USB device using ehci_platform and address 5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 pr     oto 2 vid 0x03F0 pid 0x3202
usb 1-1.5: new full speed USB device using ehci_platform and address 6
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 pr     oto 2 vid 0x04F9 pid 0x001A
usb 1-1.6: new full speed USB device using ehci_platform and address 7
usb 1-1.7: new full speed USB device using ehci_platform and address 8
root@D-Link_NAS:~# usblp.c

So how do I set up the NAS to make these printers available on the network?

(I'm also trying to get a scanner to work on the thing, but don't want to overdue it with my first post )