DSM-G600, DNS-3xx and NSA-220 Hack Forum

kb · 2009-05-11 22:22:01

Before attempting funplug on my DSM-G600, I compared the software release dates between D-Link and Conceptronic. Since Conceptronic continued to update their firmware through 19-Sep-2008, I downloaded it and compared the U-boot headers and kernel information between the different firmwares. It seems the 1.0.6 firmware uses the same 2.4.x kernel as all the D-Link firmware, so I flashed it in. My initial impressions are that the Conceptronic firmware and GUI pages are more intuitive than those in the D-Link firmware.

I'm not using the wireless access feature of my DSM-G600, it's wired into my home network. I loaded funplug and enabled telnet already, so things are looking good. I'm not certain whether I'd rather use Debian or Gentoo as a chroot system, though. Any comments/suggestions based on previous experience? Thanks.

sala · 2009-05-12 09:33:55

You should use the one you know better. Personally I like Gentoo better but if you would like to try all kind of different packages then debian would be better option since debian has binary packages. If you know exactly what you want then Gentoo is better.

kb · 2009-05-21 05:49:33

I'll probaby load Debian, then. I'm much more familiar with it and apt-get than I am with Gentoo and building from scratch. Thanks, Sala!

Masyanich · 2009-06-30 12:53:03

Please Help!
How to return the d-link firmware back to G600?
I flashed my device with CH3WNAS firmware and have a problem with cyrilic symbols,they are not displeyed correctly!!!

FIRMWARE UPGRADE
Firmware Upload Error!

The uploaded file was not accepted by the CH3WNAS. Please return to the previous page and select a valid upgrade file.

Is where any chance to upload firmware from ftp/telnet ???

Attachments:

problem.png, Size: 4,427 bytes, Downloads: 283

BertrandB · 2009-06-30 20:43:31

Where are they not displayed correctly ?
the problem may be correct with a fun_plug tool. (I think it's a smb config problem)

Masyanich · 2009-06-30 21:24:51

yes.
its smb problem

# cat /sys/mtd1/smb.default
[ global ]
client code page = 850
character set = ISO8859-1
workgroup = workgroup
netbios name = DSMG600
server string = DSMG600
hosts allow =
hosts deny =
security = SHARE
encrypt passwords = yes
max log size = 0
socket options = TCP_NODELAY SO_RCVBUF=65536 SO_SNDBUF=65536
max xmit = 65535
create mask = 0777
directory mask = 0777
force create mode = 0777
force directory mode = 0777

[ web_page ]
comment = Enter Our Web Page Setting
path = /mnt/web_page
valid users =
read only = yes
guest ok = yes

how to edit smb.default file? I need to change from character set from ISO8859-1 to CP866 (1251?)
There is no "vi,ed, dtpad. textedit, xedit" commands here....

Masyanich · 2009-07-01 14:11:44

problem solved
i just copy smb.default to pc via telnet, change character set and copy back to g600....

Stefan · 2009-12-30 11:22:20

Hello
how exactly do I come of the Conceptronic firmware again back to the D link firmware?
What must I exactly make?

DSM-G600, DNS-3xx and NSA-220 Hack Forum

Announcement

#1 2009-05-11 22:22:01

Conceptronic 1.0.6 firmware loaded to DSM-G600

#2 2009-05-12 09:33:55

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#3 2009-05-21 05:49:33

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#4 2009-06-30 12:53:03

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#5 2009-06-30 20:43:31

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#6 2009-06-30 21:24:51

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#7 2009-07-01 14:11:44

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

#8 2009-12-30 11:22:20

Re: Conceptronic 1.0.6 firmware loaded to DSM-G600

Board footer