Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Hey,
I want to use my DSM as a wireless bridge to my router. I would like to use WPA, but the stock firmware doesn't seem to have a working implementation, so I can only use WEP.
Is my best bet Debian? From what I understand Gentoo's wireless isn't working totally?
I also plan on using my DSM as a UPnP server for my xbox 360, do any of you have recommendations for once I have Debian going?
Offline
Hummm i'm using my DSM (1.02 US) as Acces Point with WPA-psk ... it's work like a charm with my 3 laptops
PS both WPA-EAS et WPA-TKIP are OK for me
Last edited by BertrandB (2010-02-24 21:24:23)
Offline
Odd .. I have the same firmware and it's not working for me. And I'm positive I'm configuring everything correctly.
Offline
well i don't know may be try to retstore default parameters and try again ...
another way to correct the configuration is to save the configuration to a pc and edit
and be aware on the length of password (13 characters for me)
i can't help more
Offline
I tried the restore the defaults a few times now and still no luck.
I'll try to save the config to a pc then edit.
Thanks for the help. If it doesn't work I think I'll just try and chroot debian and see what I can do with that.
Last edited by jaycuse (2010-02-26 19:52:23)
Offline
Hey my wireless settings wern't set when I grabbed the CfgBackup. I'm not exactly sure what to put in the settings.
I wen't through the html to try and figure out the settings, but now I can't get to the web interface so I'm guessing I have something wrong. This is what I have .. can any one help me with these settings?
This is what I have:
CF-WL-WIRELESS = "1" CF-WL-COMM-MODE = "2" CF-WL-SSID = "Bacon" CF-WL-CHANNEL = "1" CF-WL-AUTH = "2" CF-WL-SECURITY-MODE = "2" CF-WL-ENCRYPTION-MODE = "3" CF-WL-KEY-FORMATE = "0" CF-WL-DEFAULT-KEY = "" CF-WL-KEY-VALUE-1 = "" CF-WL-KEY-VALUE-2 = "" CF-WL-KEY-VALUE-3 = "" CF-WL-KEY-VALUE-4 = "" CF-WL-PSK = "password" CF-Daylight = "f" CF-WL-MACADDRESS = "" CF-WL-SIGNAL = "" CF-WL-CONNECT = "1" CF-WL-BEGIN-CHANNEL = "1" CF-WL-END-CHANNEL = "11" CF-WL-COUNTRY-REGION = "0" CF-JUMBO = "0" CF-WL-WIRELESS-MODE = "0" CF-LINKSPEED = "0"
My router settings are these:
Network Name: Bacon
Channel: 1 (2412 MHz)
Authentication: WPA-PSK and WPA2-PSK
Encryption: TKIP
Wireless Mode: 802.11b/g
Edit: Actually I'm connecting to the web interface now but it's still not connecting to my router wirelessly.
Last edited by jaycuse (2010-02-26 20:59:49)
Offline