Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
I currently have 1, 1.5 terabyte HDD installed in my 323. I would like to add another 1.5 tb drive and set up a RAID 1. Is this possible without loosing data on the currently installed disk?
Thanks.
Dave
Offline
You should back up first. As some firmwares are known to sometimes format the wrong drive.
Offline
OK, thanks. I'm backing up right now..
Offline
I am sure I have read on here that as long as the existing HDD is installed in a particular slot (IIRC RHS when looking at the drive from the front) then you can just insert in the new drive in the free slot.
Offline
I agree that it 'should work' by just installing the HD in the free slot and proceed with building the RAID1, but to attempt it without backing up first would be an unnecessary risk.
Wiggs,
Offline