Unfortunately no one can be told what fun_plug is - you have to see it for yourself.
You are not logged in.
Pages: 1
Hello
I installed fun_plug on my device. After some time I wanted to install the original system, so I did CfgBackup and reset the settings using the reset button. After the original system were installed, everything worked properly. After restoring CfgBackup, and restarting the device, started just samba. The reset button does not work, and after booting the system is not working and the power button. Turn off the device by unplugging the power supply. Via USB everything works correctly.
Now when I try to install the system using ClicnConnect program stops in a place where wait for restart the system.
I think I need a script that would be launched together with the system and restore the default settings of the flash memory. But I do not really know much about this and I do not know where to start.
Please help
sorry for my English, I translated using translate.google
Offline
To reset your device to factory defaults, try this procedure:
- Unplug the power supply
- Press the Reset button
- Connect the power supply, and turn the DNS-313 ON, while keeping the Reset button pressed ... and keep the Reset button pressed, for about 1 minute, just to be sure
- Then try to use "Click'n Connect" again ...
Offline
Thank's for your anserwe, but is not working.
Offline
I can't help more ... sorry
Maybe somebody has another idea ?
Offline
I do somthing like that:
pawel@Pawe-Dell:/media/SYSTEM$ strings slboot.img | grep 1
and this is a result:
24/13 DNS-313 DNS-313v2 1.04b01 0123456789abcdef 0123456789 0123456789ABCDEF StorLink Lepus Ethernet driver 0.0.1 ??? Error:Interrupt OTGC_INT_AVBUSERR=1... ??? Error:Interrupt OTGC_INT_OVC=1... 1.Peripheral Mode (Path Test) *** OTG Ready-1 **************************** 1. USB0 2. USB1 select1 %x 1. USB0 mini-A Host Mode >>> Waring...iTD Number >512... ??? After Complete => Active Bit=1 ==> (i=%d)(Address=0x%x) ??? qHD Status => Halted (<1>.Stall/<2>.Babble/<3>.Error Counter=0)...(Device Not Supported...) >>>Step1:Enable Remote Wake Up PASS... ??? Error 1 (Do not clear mUsbIntDmaFinish during start another DMA ) ??? Check 0x138 error = 0x%x get string 10 descriptor 1.Dump Memory ERROR: IDE[Read] STATUS REG error bit is 1 ERROR: IDE%d[Read] STATUS REG error bit is 1 ERROR: IDE%d[Write] STATUS REG error bit is 1 PRD1 alloc fail FAT16 FAT16 <32M FAT12 time<10ms 1 : Download by X-modem -l size : Send size (32 ~ 1472 bytes). Usage: sm [-b <location>] [-1|2|4] [data] Usage: dm [-b <location>] [-l <length>] [-1|2|4] Length is too long! (must be less 1024)! 15:48:50 1.2.5_sata Storlink SL351x Boot Loader [Linux] 31!! DB1! DNS-313v2 1.04b03
What is mean?
Last edited by ring-s (2010-05-31 00:05:45)
Offline
My device is working correctly now, i don't now why, but im happy.
I build a Serial link and it work.
This is my 2 logs
1. When the system not star
found magic num
found magic num
found magic num
bootLoader made time: 1258962533
bootLoader version: 1.04b03
Waiting for disk ready & detect ...
IDE 0 Detect disk 0
Disk Drive: IDE-0, Device-0, 312579695 Sectors [UDMA6] 160 GB 51 MB
Partition 1: Linux Swap
Partition 2: HPFS/NTFS
Partition 3: Linux 1012095 Sectors 518 MB
Partition 4: Linux 401625 Sectors 205 MB
foun file zImage
Processor: SL3512c2
CPU Rate: 300000000
AHB Bus Clock:150MHz Ratio:2/1
MAC 1 Address: 00:1C:F0:90:6D:55
MAC 2 Address: 00:50:C2:22:22:22
inet addr: 0.0.0.0/255.255.255.0
Kernel RAM Location: 0x00600000 Filename: /.boot/zImage
Initrd RAM Location: 0x00800000 Filename: /.boot/ramdisk.bin.gz
PHY 0 Addr 1 Vendor ID: 0x001cc912
==> enter ^C to abort booting within 2 seconds ......
boot from ide
checked model name : DNS-313v2
Load rd.gz 840814 ,fileSize is 840814...tftp model name : DNS-313v2
made time: 1258962544
version: 1.04b08
Load zImage 1068108 ,fileSize is 1068108...tftp model name : DNS-313v2
made time: 1258962543
version: 1.04b08
Uncompressing Linux..................................................................... done, booting the kernel.
Linux version 2.6.15 (root@CentServer) (gcc version 3.4.4) #179 Mon Nov 23 15:48:00 CST 2009
CPU: FA526id(wb) [66015261] revision 1 (ARMv4)
Machine: GeminiA
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw mem=32M console=ttySL0,19200 initrd=0x00800000,4M ramdisk_size=4096
PID hash table entries: 256 (order: 8, 4096 bytes)
Bus: 150MHz(2/1)
Console: colour dummy device 80x30
sl2312 console setup :
Disable IDE...config to SATA mode
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 25812KB available (1743K code, 590K data, 84K init)
Mount-cache hash table entries: 512
*** Page_chain_cachep Init!***
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4096K
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler deadline registered
Real Time Clock Driver v0.10
Gemini Gpio init
g751 init
flash probe init
Register Gemini Power control
Power event by Unknow Source
Watchdog Timer Initialized
ttySL0 at MMIO 0x42000000 (irq = 18) is a SL2312
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
VSC-switch not found
---> phy_vendor = 0x1CC912
SL351x Giga Ethernet driver 0.1.6 built at Nov 23 2009 15:46:40
sata_lepus1 version 0.1
ata1: SATA max UDMA/133 cmd 0xC2800020 ctl 0xC2800036 bmdma 0xC2800000 irq 5
scsi0 : sata_lepus1
sata_lepus0 version 0.1
ata2: SATA max UDMA/133 cmd 0xC2804020 ctl 0xC2804036 bmdma 0xC2804000 irq 4
ata2: dev 0 ATA-7, max UDMA/133, 312579695 sectors: LBA48
HD speed:U6 (0x46)
ata2: dev 0 configured for UDMA/133
scsi1 : sata_lepus0
Vendor: ATA Model: ST3160815AS Rev: 4.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
SL2312 MTD Driver Init.......
Not find EN29LV400A.
Search for id:(01 22ba) interleave(1) type(2)
Found: S29AL004DB
SL2312 CFI Flash: Found 1 x16 devices at 0x0 in 16-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "SL2312 CFI Flash":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "MTD1"
0x00060000-0x00080000 : "MTD2"
SL2312 MTD Driver Init Success ......
FTC_FOTG2XX : Init FOTG2XX Driver
Init FOTG2xx driver
FTC_FOTG2XX : >>> Found FOTG2XX ...
pFTC_OTG c0bb83e0
hcd->self.controller c0bbd400
hcd end
hcd_buffer_create
ehci-hcd-FOTG2XX ehci-hcd-FOTG2XX: new USB bus registered, assigned bus number 1
usb_register_bus
ghcd_FOTG2XX hcd c0bbd400
hcd_irq_For_OTG
ehci->caps->length 10, hcd->regs f6800000 , ehci->regs f6800010
udev->state 1
drivers/usb/host/ehci-hcd-FOTG2XX.c: USB support enabled, EHCI rev 101. 0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
FTC_FOTG2XX : >>> +FOTG2XX_get_otg_transceiver
FTC_FOTG2XX : registered host c0bbd400
OTG2XX act as HOST only (don't need to wait gadget driver)
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
OTG_enable_VBUS
FTC_FOTG2XX : >>> Drive VBUS ok...
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
OTG_enable_VBUS
mdwOTGC_Control_A_VBUS_VLD_Rd 80000
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
ehci otg_set_host status 0
FTC_FOTG200_udc_1 : Init USB device Lower driver
FOTG200_BASE_ADDRESS = 0xf6900000
******reg_val = c0422037
FTC_FOTG200_udc_1 : ***** FOTG200 Peripheral 2.0 Test program *****
FTC_FOTG200_udc_1 : L0: System initial, Please wait...
FTC_FOTG200_udc_1 : L1: System is ready(dev->EPUseDMA=0xff)...
FTC_usb_probe_1 end
Initializing USB Mass Storage driver...
connect_change 1
clear_bit
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 84K
init started: BusyBox v1.00-pre1 (2008.03.07-06:35+0000) multi-call binary
start S00
Adding 506008k swap on /dev/sda1. Priority:-1 extents:1 across:506008k
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
rm: unable to stat `/mnt/sda3/sys/mtd1': Input/output error
rm: unable to remove `/mnt/sda3/sys': Directory not empty
swapoff
End of /linuxrc -- transfer to /sbin/init
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Link /var/spool to /tmp/spool
Link /sys
Link slboot.img
Link web
Link modules
Link etc/hotplug
======= Run old shell script =======
** Johnson Poweron the system
mount: Mounting /proc on /proc failed: Device or resource busy
mount: Mounting none on /dev/pts failed: Device or resource busy
mount tmpfs for hibernation
mount: Mounting tmpfs on /var/spool failed: No such file or directory
Check MTD block device V2.03.04242009
MTDC: Mount MTD1 done.
MTDC: Mount MTD2 done.
MTDC: No need to copy file.
** copy mtd1 files
cp: /sys/mtd1/firmwareupdate: No such file or directory
cp: /sys/mtd1/codepage: No such file or directory
cp: /sys/mtd1/hd_magic_num: No such file or directory
cp: /sys/mtd1/onedisk: No such file or directory
cp: /sys/mtd1/MountError: No such file or directory
mv: /sys/mtd1/firmwareupdate: No such file or directory
mv: /sys/mtd1/restore: No such file or directory
mv: /sys/mtd1/format_ok: No such file or directory
mv: /sys/mtd1/pls_sync: No such file or directory
mv: /sys/mtd1/pls_chmod_a2: No such file or directory
mv: /sys/mtd1/pls_chmod_b2: No such file or directory
mv: /tmp/hd_magic_num: No such file or directory
** link lib **
** link web **
** link /usr/bin **
** link /usr/sbin **
** link /usr/local/LPRng **
cp: /sys/crfs/default/server-key-nopassword.pem: No such file or directory
** set loopback interface
ALPHA Networks Incorporation, setmacid V1.00 program start ...
found magic num
found magic num
found magic num
Storlink egiga0 address = 001CF0906D55
** Johnson check the bootloader's version and update it
tar: Invalid tar magic
killapp: No such file or directory
found magic num
found magic num
found magic num
found magic num
the file is /slboot.img
found magic num
found magic num
found magic num
now update slboot
the firmware is not new than the board
** execute rc.init.sh
Can't find version control
GMAC-0 Addr 1 Vendor ID: 0x001cc912
Link Up (0x796d) MII Link status: 0000796d Phy status: 0000002f
MII REG 10 = 0x2800
1000M/Full
Flow Control Enable.
Storlink egiga0 address = 001CF0906D55
Enable MAC Flow Control...
SIOCDELRT: No such process
Setting hostname .... Sieciowy
fuse init (API version 7.8)
fuse distribution version: 2.6.3
ufsd: module license 'Commercial product' taints kernel.
ufsd: driver loaded at bf00c000 built on Dec 16 2008 21:30:18
UFSD version 7.01 (Dec 16 2008, 21:21:41)
NTFS read/write support included
$Id: ufsdvfs.c,v 1.188 2008/12/04 15:52:27 shura Exp $
mounting /dev/sda2
Build Shared Name Table version v1.04
mounting /dev/sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
partitions = 4, sys_ind = 0x82
exit status 0
success
Setting up swapspace version 1, size = 518156288 bytes
Adding 506008k swap on /dev/sda1. Priority:-2 extents:1 across:506008k
Can't open /etc/raidtab2web !
buf2=Volume_1
Set Timezone=29
cmd =cp /sys/crfs/zoneinfo/29Sarajevo /etc/localtime
Sun May 30 22:06:49 CEST 2010
-------------------------
1.Set Date & time ...(command: sntp -r ntp1.dlink.com &)
sntp: using NTP server ntp1.dlink.com (207.232.83.70)
NTP Server connected successfully!!!
1
2
RTC_SET_TIME::2010-05-30 20:06:57
crond[1109]: crond 2.3.2 dillon, started, log level 8
1.04b08(15.48.11.23.2009)
11/23/2009
mfg_search
/web/swap_a file exist(ext2)
interfaces: No such file or directory
unix: No such file or directory
dos: No such file or directory
display: No such file or directory
workgroup: No such file or directory
netbios: No such file or directory
server: No such file or directory
hosts: No such file or directory
hosts: No such file or directory
security: No such file or directory
encrypt: No such file or directory
max: No such file or directory
socket: No such file or directory
max: No such file or directory
create: No such file or directory
directory: No such file or directory
force: No such file or directory
force: No such file or directory
use: No such file or directory
use: No such file or directory
comment: No such file or directory
path: No such file or directory
valid: No such file or directory
---------- SATA-1 STANDBY -----------
---------- SATA-0 STANDBY Pid 0 -----------2. When the system was stsrt
found magic num
found magic num
found magic num
bootLoader made time: 1258962533
bootLoader version: 1.04b03
Waiting for disk ready & detect ...
IDE 0 Detect disk 0
Disk Drive: IDE-0, Device-0, 1953525168 Sectors [UDMA6] 1000 GB 268 MB
Partition 1: Linux Swap
Partition 2: HPFS/NTFS
Partition 3: Linux 1012095 Sectors 518 MB
Partition 4: Linux 401625 Sectors 205 MB
foun file zImage
Processor: SL3512c2
CPU Rate: 300000000
AHB Bus Clock:150MHz Ratio:2/1
MAC 1 Address: 00:1C:F0:90:6D:55
MAC 2 Address: 00:50:C2:22:22:22
inet addr: 0.0.0.0/255.255.255.0
Kernel RAM Location: 0x00600000 Filename: /.boot/zImage
Initrd RAM Location: 0x00800000 Filename: /.boot/ramdisk.bin.gz
PHY 0 Addr 1 Vendor ID: 0x001cc912
==> enter ^C to abort booting within 2 seconds ......
boot from ide
checked model name : DNS-313v2
Load rd.gz 840814 ,fileSize is 840814...tftp model name : DNS-313v2
made time: 1258962544
version: 1.04b08
Load zImage 1068108 ,fileSize is 1068108...tftp model name : DNS-313v2
made time: 1258962543
version: 1.04b08
Uncompressing Linux..................................................................... done, booting the kernel.
Linux version 2.6.15 (root@CentServer) (gcc version 3.4.4) #179 Mon Nov 23 15:48:00 CST 2009
CPU: FA526id(wb) [66015261] revision 1 (ARMv4)
Machine: GeminiA
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 2, 16 byte lines, 512 sets
CPU0: D cache: 8192 bytes, associativity 2, 16 byte lines, 256 sets
Built 1 zonelists
Kernel command line: root=/dev/ram0 rw mem=32M console=ttySL0,19200 initrd=0x00800000,4M ramdisk_size=4096
PID hash table entries: 256 (order: 8, 4096 bytes)
Bus: 150MHz(2/1)
Console: colour dummy device 80x30
sl2312 console setup :
Disable IDE...config to SATA mode
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 25812KB available (1743K code, 590K data, 84K init)
Mount-cache hash table entries: 512
*** Page_chain_cachep Init!***
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4096K
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler deadline registered
Real Time Clock Driver v0.10
Gemini Gpio init
g751 init
flash probe init
Register Gemini Power control
Power event by Unknow Source
Watchdog Timer Initialized
ttySL0 at MMIO 0x42000000 (irq = 18) is a SL2312
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
VSC-switch not found
---> phy_vendor = 0x1CC912
SL351x Giga Ethernet driver 0.1.6 built at Nov 23 2009 15:46:40
sata_lepus1 version 0.1
ata1: SATA max UDMA/133 cmd 0xC2800020 ctl 0xC2800036 bmdma 0xC2800000 irq 5
scsi0 : sata_lepus1
sata_lepus0 version 0.1
ata2: SATA max UDMA/133 cmd 0xC2804020 ctl 0xC2804036 bmdma 0xC2804000 irq 4
ata2: dev 0 ATA-8, max UDMA/133, 1953525168 sectors: LBA48
HD speed:U6 (0x46)
ata2: dev 0 configured for UDMA/133
scsi1 : sata_lepus0
Vendor: ATA Model: ST31000340AS Rev: SD15
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
sd 1:0:0:0: Attached scsi generic sg0 type 0
SL2312 MTD Driver Init.......
Not find EN29LV400A.
Search for id:(01 22ba) interleave(1) type(2)
Found: S29AL004DB
SL2312 CFI Flash: Found 1 x16 devices at 0x0 in 16-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 3 MTD partitions on "SL2312 CFI Flash":
0x00000000-0x00040000 : "RedBoot"
0x00040000-0x00060000 : "MTD1"
0x00060000-0x00080000 : "MTD2"
SL2312 MTD Driver Init Success ......
FTC_FOTG2XX : Init FOTG2XX Driver
Init FOTG2xx driver
FTC_FOTG2XX : >>> Found FOTG2XX ...
pFTC_OTG c0bb83e0
hcd->self.controller c0bbd400
hcd end
hcd_buffer_create
ehci-hcd-FOTG2XX ehci-hcd-FOTG2XX: new USB bus registered, assigned bus number 1
usb_register_bus
ghcd_FOTG2XX hcd c0bbd400
hcd_irq_For_OTG
ehci->caps->length 10, hcd->regs f6800000 , ehci->regs f6800010
udev->state 1
drivers/usb/host/ehci-hcd-FOTG2XX.c: USB support enabled, EHCI rev 101. 0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
FTC_FOTG2XX : >>> +FOTG2XX_get_otg_transceiver
FTC_FOTG2XX : registered host c0bbd400
OTG2XX act as HOST only (don't need to wait gadget driver)
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
+(OTGC_Init)
pFTC_OTG->otg.default_a=1
OTG_enable_VBUS
FTC_FOTG2XX : >>> Drive VBUS ok...
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
OTG_enable_VBUS
mdwOTGC_Control_A_VBUS_VLD_Rd 80000
+OTGP_Close()
OTG2XX act as HOST only (remove gadget function)
+OTGH_Open()(0x30=0x0)
ehci otg_set_host status 0
FTC_FOTG200_udc_1 : Init USB device Lower driver
FOTG200_BASE_ADDRESS = 0xf6900000
******reg_val = c0422037
FTC_FOTG200_udc_1 : ***** FOTG200 Peripheral 2.0 Test program *****
FTC_FOTG200_udc_1 : L0: System initial, Please wait...
FTC_FOTG200_udc_1 : L1: System is ready(dev->EPUseDMA=0xff)...
FTC_usb_probe_1 end
Initializing USB Mass Storage driver...
connect_change 1
clear_bit
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 84K
init started: BusyBox v1.00-pre1 (2008.03.07-06:35+0000) multi-call binary
start S00
Adding 506008k swap on /dev/sda1. Priority:-1 extents:1 across:506008k
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
swapoff
End of /linuxrc -- transfer to /sbin/init
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Link /var/spool to /tmp/spool
Link /sys
Link slboot.img
Link web
Link modules
Link etc/hotplug
======= Run old shell script =======
** Johnson Poweron the system
mount: Mounting /proc on /proc failed: Device or resource busy
mount: Mounting none on /dev/pts failed: Device or resource busy
mount tmpfs for hibernation
mount: Mounting tmpfs on /var/spool failed: No such file or directory
Check MTD block device V2.03.04242009
MTDC: Mount MTD1 done.
MTDC: Mount MTD2 done.
MTDC: No need to copy file.
** copy mtd1 files
cp: /sys/mtd1/firmwareupdate: No such file or directory
cp: /sys/mtd1/codepage: No such file or directory
cp: /sys/mtd1/hd_magic_num: No such file or directory
cp: /sys/mtd1/onedisk: No such file or directory
cp: /sys/mtd1/MountError: No such file or directory
mv: /sys/mtd1/firmwareupdate: No such file or directory
mv: /sys/mtd1/restore: No such file or directory
mv: /sys/mtd1/format_ok: No such file or directory
mv: /sys/mtd1/pls_sync: No such file or directory
mv: /sys/mtd1/pls_chmod_a2: No such file or directory
mv: /sys/mtd1/pls_chmod_b2: No such file or directory
cp: /sys/mtd1/ftpgroup: No such file or directory
mv: /tmp/hd_magic_num: No such file or directory
** link lib **
** link web **
** link /usr/bin **
** link /usr/sbin **
** link /usr/local/LPRng **
cp: /sys/crfs/default/server-key-nopassword.pem: No such file or directory
** set loopback interface
ALPHA Networks Incorporation, setmacid V1.00 program start ...
found magic num
found magic num
found magic num
Storlink egiga0 address = 001CF0906D55
** Johnson check the bootloader's version and update it
tar: Invalid tar magic
killapp: No such file or directory
found magic num
found magic num
found magic num
found magic num
the file is /slboot.img
found magic num
found magic num
found magic num
now update slboot
the firmware is not new than the board
** execute rc.init.sh
SIOCADDRT: Network is unreachable
Setting hostname .... dlink-906d55
Starting DHCP client ....
*****8192.168.0.32
info, udhcpc (v0.9.9-pre) started
Can't find version control
GMAC-0 Addr 1 Vendor ID: 0x001cc912
Link Up (0x796d) MII Link status: 0000796d Phy status: 0000002f
MII REG 10 = 0x2800
1000M/Full
Flow Control Enable.
Storlink egiga0 address = 001CF0906D55
Enable MAC Flow Control...
get IP = [NONE SET]
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
debug, Sending discover...
UPnP(alpha) AV / MediaServer v2.00.0523.2008.
No CodePage
UUID[uuid:4be1a9cf-11f8-2a22-6474-001cf0906d55]
sendto-a debug, Sending select for 192.168.1.103...
info, Lease of 192.168.1.103 obtained, lease time 43200
deleting routers
SIOCDELRT: No such process
adding dns 192.168.1.100
get IP = 192.168.1.103
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
UPnP(alpha) AV / MediaServer v2.00.0523.2008.
No CodePage
UUID[uuid:4be1a9cf-11f8-2a22-6474-001cf0906d55]
fuse init (API version 7.8)
fuse distribution version: 2.6.3
ufsd: module license 'Commercial product' taints kernel.
ufsd: driver loaded at bf00c000 built on Dec 16 2008 21:30:18
UFSD version 7.01 (Dec 16 2008, 21:21:41)
NTFS read/write support included
$Id: ufsdvfs.c,v 1.188 2008/12/04 15:52:27 shura Exp $
mounting /dev/sda2
Build Shared Name Table version v1.04
mounting /dev/sda4
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
The number of cylinders for this disk is set to 121601.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
partitions = 4, sys_ind = 0x82
exit status 0
success
Setting up swapspace version 1, size = 518156288 bytes
Adding 506008k swap on /dev/sda1. Priority:-2 extents:1 across:506008k
Can't open /etc/raidtab2web !
buf2=Volume_1
Set Timezone=25
cmd =cp /sys/crfs/zoneinfo/25London /etc/localtime
Sun May 30 21:36:59 BST 2010
-------------------------
1.Set Date & time ...(command: sntp -r ntp1.dlink.com &)
2.Set Date & time ...(command: sntp -r ntp.dlink.com.tw &)
3.Set Date & time ...(command: sntp -r ntp1.dlink.com &)
4.Set Date & time ...(command: sntp -r ntp.dlink.com.tw &)
crond[1163]: crond 2.3.2 dillon, started, log level 8
1.04b08(15.48.11.23.2009)
11/23/2009
mfg_search
/web/swap_a file exist(ext2)
UPnP(alpha) AV / MediaServer v2.00.0523.2008.
** Get MAC Addr
No CodePage
UUID[uuid:4be1a9cf-11f8-2a22-6474-001cf0906d55]
UPNPAV_MGR: Generate key failed.
cp: /mnt/HD_a4/.wget.logUPNPMGR: Get ShareFolder=/mnt/HD_a2.
upnpav_path=/mnt/HD_a2
Have not diskA
Have not diskB
: No such file or directory
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
Open CodePage Error
Codepage[0] not found, set to default fromcode
sharefolder /mnt/HD_a2/
count file-->
haven't /mnt/HD_a4/.systemfile/
<prescan> "/mnt/HD_b4" not found
SQLite db file create
creat table-->
Scan Music -->
Parse playlist-->
count 0
Sort DBtable-->
Assign path_objid_tbl media-->
Cover old-DB table-->
Finish-->
total_scan_cnt[0]
Upnp Folder = /mnt/HD_a2
Add 3 directorys to inotify watch list
rm: cannot remove `/tmp/set_ddns_done': No such file or directory
rm: cannot remove `/tmp/set_ddns_error': No such file or directory
rm: cannot remove `/web/ddns_start': No such file or directory
rm: cannot remove `/tmp/aip.gz': No such file or directory
PowerManagementState = 1
time = 10
kill: Usage: kill [-s sigspec | -signum | -sigspec] [pid | job]... or
kill -l [exitstatus]
language=ENGLISH
======= end of old shell script =======
op_server v2.01.06012006
Enable SATA HDD Power Management
UUID= 00 1c f0 90 6d 55 c0 a8 01 67
BusyBox v1.00-pre1 (2008.03.07-06:35+0000) Built-in shell (ash)
-----------------PM0_PID 1255---------------
Enter 'help' for a list of built-in commands.
-----------------UbuttonPid 1236---------------Offline
Pages: 1