DSM-G600, DNS-3xx and NSA-220 Hack Forum

perfectdark wrote:

what am i doing wrong?

You're not reading the Wiki:
http://dns323.kood.org/howto:ffp#troubleshooting

You don't get an optware.log from my fun_plug script. Seems you're mixing up things.

If I were you, I'd start over following the wiki and download the files again as it seems you may have the wrong ones if they are installing files that are not part of the proper package.

You didn't follow the instructions correctly or somehow got on the wrong wiki.  Otherwise you would not be seeing an optware file and not trying to put things on Volume_2.

I agree; start over.  Remove anything that you added to your disks as part of this effort.

Go to

http://www.inreto.de/dns323/fun-plug/0.5/

and download the last two items:

fun_plug
fun_plug.tgz

Copy them both from the machine you downloaded them to onto the Volume_1 share and reboot.  Then pick up the instructions on:

http://dns323.kood.org/howto:ffp

Perhaps follow the first link in the Installation - DNS-323 section - nas-tweaks.net.  The wiki page itself is rather confusing but still usable if you read the whole thing carefully.

karlrado wrote:

You didn't follow the instructions correctly or somehow got on the wrong wiki.  Otherwise you would not be seeing an optware file and not trying to put things on Volume_2.

I agree; start over.  Remove anything that you added to your disks as part of this effort.

Go to

http://www.inreto.de/dns323/fun-plug/0.5/

and download the last two items:

fun_plug
fun_plug.tgz

Copy them both from the machine you downloaded them to onto the Volume_1 share and reboot.  Then pick up the instructions on:

http://dns323.kood.org/howto:ffp

Perhaps follow the first link in the Installation - DNS-323 section - nas-tweaks.net.  The wiki page itself is rather confusing but still usable if you read the whole thing carefully.

first thanks for the post
secoond, your not readiing my posts properly.  When i referenced that i had the files on Vol_2 that was because i tried them on Vol_1 rebooted nothing changed, so i tried Vol_2 nothing changed (except i noticed this optaware file) and i've tried files on both Vol_1 and Vol_2 at the same time nothing changed
i am reading wiki and i've done some google searches, also found another guy who has 2 DNS-323 units and said for whatever reason only one would take the fun_plug install and he was doing it the same way on both

I have redownloaded both your files directly to DNS-323 ... rebooted nothing
I also downloaded them to my PC and used FTP to transfer them to DNS-323 nothing


"Getting started on DNS-323 and CH3SNAS:

  Copy fun_plug and fun_plug.tgz to Volume 1 and reboot. If
  successful, the fun_plug.tgz file is unpacked (ffp directory) and
  deleted. A telnet server is started."

I did it again...... I don't see any new directories and cannot open a telnet session

Last edited by perfectdark (2010-10-30 15:13:21)

bound4h wrote:

Reformat both drives and drop both files on both volumes and reboot.

I have over 1.6tb of data on both drives that I cannot format

JamesD wrote:

I'm making a silly guess here, but it may be that the drives are in the wrong slots. I ran for a while with a single drive in the left slot, not the drive 0 right slot. Since there was only one drive, the 323 made it volume 1. When I added a new drive, is was set up as vloume 2, even though it was in the right slot.

It took some fiddling to get them recognised as the right volume in the right slot. If I remember, I had to pull the drives, put volume 1 in the right-hand slot, shut down, restart, shut down again, add the volume 2 drive in the left-hand slot, restart. Then the two drives were in the right slot with the right labels.

It may be that the firmware is looking for a funplug file in partition 4 of the right-hand drive, and not going by volume labels. Once funplug starts, it may be using volume labels, hence the failure.

Anyway, that's my SWAG. (silly wild-ass guess)

Jim

I thought it could be something like to too, which is why i put the fun_plug files on both drives

I just got this working after having the same issues.  A few things to re-stress, that I learned here (and by experiment):
A) My web browser wanted to unpack the fun_plug.tgz to fun_plug.tar (not what the script expects), don't use Safari, I succeeded with Firefox (on a Mac).
B) My web browser also wanted to rename fun_plug to fun_plug.sh.  Renaming or using Firefox clears this up
C) Still didn't work.  Reformatted disks as simple disks Ext3, no luck
D) Tried suggestion here and in another thread, use FTP.  Finally success.
E) I see you tried FTP, but check permissions afterward, maybe your download path is causing problems.  In ftp type "ls -l" and see what permissions the two files have.  If not 777, consider "ftp> chmod 777 fun_plug"  and "ftp> chmod 666 fun_plug.tgz".  I did not have to try this but maybe you do.  Also be sure in FTP to cd to Volume_1, before any of this, and remember the suggestions to type "ascii" before "put fun_plug", and "binary" before "put fun_plug.tgz".  Check file lengths against originals using " ls -l".

Good Luck.