DSM-G600, DNS-3xx and NSA-220 Hack Forum

Hello guys

I've had a dns 313 for a long time but never really used it as for videos the stream keeps stopping.  I have been reading up on your forum about Native Lenny.

I have been trying to install http://dns323.kood.org/howto:chroot_debian with no avail. 

I have noticed Charminbear's install guide (http://www.msbd.de/dns313/Install_lenny_en.rtf) but the link doesn't seam to work now. 

Does anyone have instructions on how to get either to work.

Thanks

Hi aFoP,

Thankyou for your quick response.  My DNS-313 is revision A.

Will your script work for my machine?  If not what else would you suggest.

Thanks.

Hi, your device should get IP from DHCP server in case you have one in your network...most probably this DHCP server will be your router
The hostname is DNS-313.
So you can discover your LAN with nmap tool on linux:
nmap 192.168.2.0/24 (if your router's IP is 192.168.2.1)
nmap 192.168.1.0/24 ((if your router's IP is 192.168.1.1)
becasue the router most probably provides you with one of the above LAN segments...
And check the IPs what you find, one of them should be the NAS.
for me it is 192.168.2.114, and I logged in via ssh on port 22...
Then you have a lot to do to update, customize your NAS etc..
As I remember transmission is already reachable on port 9091.
Here is the config file i use:

root@DNS-313:~# cat /etc/transmission/settings.json
{
    "alt-speed-down": 50,
    "alt-speed-enabled": false,
    "alt-speed-time-begin": 540,
    "alt-speed-time-day": 127,
    "alt-speed-time-enabled": false,
    "alt-speed-time-end": 1020,
    "alt-speed-up": 50,
    "bind-address-ipv4": "0.0.0.0",
    "bind-address-ipv6": "::",
    "blocklist-enabled": false,
    "dht-enabled": true,
    "download-dir": "\/home\/BT\/complete\/",
    "encryption": 1,
    "incomplete-dir": "\/home\/BT\/incomplete\/",
    "incomplete-dir-enabled": true,
    "lazy-bitfield-enabled": true,
    "message-level": 1,
    "open-file-limit": 10,
    "peer-limit-global": 100,
    "peer-limit-per-torrent": 30,
    "peer-port": 51515,
    "peer-port-random-enabled": 0,
    "peer-port-random-high": 65535,
    "peer-port-random-low": 1024,
    "peer-port-random-on-start": false,
    "peer-socket-tos": 0,
    "pex-enabled": true,
    "port-forwarding-enabled": true,
    "preallocation": 1,
    "proxy": "",
    "proxy-auth-enabled": false,
    "proxy-auth-password": "",
    "proxy-auth-username": "",
    "proxy-enabled": false,
    "proxy-port": 80,
    "proxy-type": 0,
    "ratio-limit": 2.0000,
    "ratio-limit-enabled": false,
    "rpc-authentication-required": true,
    "rpc-bind-address": "0.0.0.0",
    "rpc-enabled": true,
    "rpc-password": "PASSWORD",
    "rpc-port": 9091,
    "rpc-username": "nasadmin",
    "rpc-whitelist": "*.*.*.*",
    "rpc-whitelist-enabled": false,
    "speed-limit-down": 350,
    "speed-limit-down-enabled": true,
    "speed-limit-up": 150,
    "speed-limit-up-enabled": true,
    "umask": 18,
    "upload-slots-per-torrent": 4,
    "watch-dir": "\/home\/BT\/torrents\/",
    "watch-dir-enabled": true
}
root@DNS-313:~#

But please note I have a DNS-313 revB and I already updated/reconfigured the Debian on it to my needs...
I have even installed minidlna (?1.25) on it from source ... and Webmin as well 

Last edited by aFoP (2014-01-24 20:47:49)

In case you can ping the device login via telnet to it.
Then you have to become root and you can set your own password. But make sure you stop transmission before it, find the pid of it and kill it...
kill -9 <pid>
or do it in one line:

kill -9 `ps aux | grep transmission | grep -v grep | awk -F" " '{print $2}'`

Then enter the password here into /etc/transmission/settings.json:

"rpc-password": "{633de78b9a72a2d94dc19c1bd503dbf4cd3a3e90v9ufG5vy",

like

"rpc-password": "YOURNEWPASSWORD",

and reboot the NAS!

Last edited by aFoP (2013-12-10 23:31:34)

Hi!
You ran the script as normal user...it must have been run as root (either by logging in as root or you should change to root by "sudo su -".)
I don't know whether you can become root by only using a Live CD, you should run the script on an installed system instead...

Last edited by aFoP (2014-01-19 23:07:33)

inionis wrote:

Hi.
I have install debian_v2.tar on my DNS-313.
How to upgrade transmission from 1.73 to 2.82??

I guess you can only do it by installing transmission from source. Here is a how-to for debian squeeze (not for debian lenny), but I didn't try it myself:
http://www.gomiworld.net/installing-tra … an-squeeze

Last edited by aFoP (2014-03-09 20:58:11)