DSM-G600, DNS-3xx and NSA-220 Hack Forum

How does this relate to the firmware version 1.04b58 posted the day before this post by member Tilly?
Both claim to fix the 94% format error. I think they both address the Vista issues.
1.04b58 doesn't mention anything about the NFS module or PS3 problem though.
Is 1.03(BETA) a custom firmware? Can we get the NFS module for 1.04b58 via fun_plug?

Thanks!

Conceptronic is activily making firmware, that's 1 thing you don't see much. So i am still very happy with my CH3SNAS, and possible will buy a second one :-)

Hi, without trying to look too dumb here what will installing the NFS module give me over SMB? Does it actually act as a replacement or does it just allow external devices to communicate via an alternative protocol?
What is the benefit?

Last edited by gareth (2007-11-21 10:44:15)

zeroday wrote:

Nov 21 16:34:17 nas daemon.err portmap[2413]: cannot bind udp: Address already in use

That one looks strange and probably means that a portmapper is already running. You're not running unfs and nfs at the same time?

fonz wrote:

zeroday wrote:

Nov 21 16:34:17 nas daemon.err portmap[2413]: cannot bind udp: Address already in use

That one looks strange and probably means that a portmapper is already running. You're not running unfs and nfs at the same time?

I think so ;-)

i did not see any guideline and I am just a stupid developer trying to test features people request ;-)
I am a geek, but in learning for linux ;-)
but I could mount, I saw with ls -l the files .. could browse the folders..
Hey my customer(s) can be happy ..
LOL

oh b.t.w. CH3SNAS = Black Box .. you will notice from December ;p)

Last edited by zeroday (2007-11-21 20:43:16)

Hey zeroday,

can I request WOL feature? This is an essential feature, a must have!

I'm using my NAS once a week for backup, thus having it powered down most of the time. I've placed it in the basement while my desktop is in the 2nd floor. I don't want to run down every time I want to use the NAS...

Any chance to get it implemented in one of the next FW updates? It shouldn't be a big deal to do it.

Thanks, ollo

Last edited by ollo (2007-11-24 18:23:48)

see my other thread .. ch3snas has got a face-lift

w00 wrote:

zeroday wrote:

oh b.t.w. CH3SNAS = Black Box .. you will notice from December ;p)

what do you mean, zeroday?

I've only had the box for 2 days but it's already proving to be more useful than my HPMediavault due to hackability.

Your fun_plug v1.04 was downloaded and installed in under 15 minutes. Following your instruction it worked flawlessly. Thank you.

With the fun_plug add-on, USB storage support (Thanks to ??? .ko), and the possibility to hack further than the HPMediavault I'm liking it.

Anyone know either of the following answers?

What is the highest supported drive space allowance? The HPMediavault tops at 1.25 to 1.5 terabytes, including USB connections. This was explained as a ram limitation at 64meg. As the DNS-323 has the same amount of ram are we limited to the same cap? (HPMediavault uses a moded BusyBox distro.)

Again, thanks for your time and scripts. This site was the main reason I took a chance on this low cost NAS. So far I'm not sorry.

fonz wrote:

zeroday wrote:

really kewl is that NFS module support is added

Does it also come with portmap and nfs-utils? If no, I've added nfs-utils to my funplug. I've made a 0.4-test version is available for anyone who would like to try this out.
http://www.inreto.de/dns323/fun-plug/0.4-test/

fonz wrote:

zeroday wrote:

really kewl is that NFS module support is added

Does it also come with portmap and nfs-utils? If no, I've added nfs-utils to my funplug. I've made a 0.4-test version is available for anyone who would like to try this out.
http://www.inreto.de/dns323/fun-plug/0.4-test/

I believe only the module support was requested ;-) so no other tools are avail I believe. At least it's not running.

Tjsak!
zeroday

WOL feature is impossible due to design of Hardware. There are some components not onboard to make WOL possible.

Sorry ..

Zeroday

ollo wrote:

Hey zeroday,

can I request WOL feature? This is an essential feature, a must have!

I'm using my NAS once a week for backup, thus having it powered down most of the time. I've placed it in the basement while my desktop is in the 2nd floor. I don't want to run down every time I want to use the NAS...

Any chance to get it implemented in one of the next FW updates? It shouldn't be a big deal to do it.

Thanks, ollo

KyleK wrote:

zeroday wrote:

see my other thread .. ch3snas has got a face-lift

w00 wrote:

what do you mean, zeroday?

Any clue as to when the new CH3SNAS will be available?
It seems the older revision is hard to get by, at least in Germany, and I've already ordered the device.
I hate waiting for gadgets

new version 'the black box' is being delivered right now .. yoehoeee!

Zeroday

Last edited by zeroday (2007-12-06 08:54:55)

@zeroday

WOL- bummer  :-(

regards,  ollo