DSM-G600, DNS-3xx and NSA-220 Hack Forum

Alright, I see now.  I must have missed when you said it before that you're on the "make test" step.  That step really isn't always required, but what is required is "make install" and I don't see that you have run that step.  If you haven't, give that shot and see if it works.

Hi there! Thank you for your howto.

Just FYI for those folks who are doing this, the perl modules are in:

http://www.inreto.de/dns323/fun-plug/0. … ages/perl/

Compress::Zlib is also there, but I donno if File::RsyncP is inclusive in the perl package.

Hope this helps somewhat.

Edit: BTW... I am getting that perl error that log2g is getting. funplug 0.5... pretty weird.

/mnt/HD_a2/ffp/tmp/BackupPC-3.1.0 # perl configure.pl

Error loading BackupPC::Lib: Bareword "compareLOGName" not allowed while "strict subs" in use at lib/
Compilation failed in require at (eval 20) line 2.
BEGIN failed--compilation aborted at (eval 20) line 2.

BackupPC cannot load the package BackupPC::Lib, which is included in the
BackupPC distribution.  This probably means you did not cd to the
unpacked BackupPC distribution before running configure.pl, eg:

    cd BackupPC-3.1.0
    ./configure.pl

Please try again.

/mnt/HD_a2/ffp/tmp/BackupPC-3.1.0 #

with:

http://www.inreto.de/dns323/fun-plug/0. … 5.10-2.tgz
http://search.cpan.org/CPAN/authors/id/ … 011.tar.gz
http://search.cpan.org/CPAN/authors/id/ … 011.tar.gz
http://search.cpan.org/CPAN/authors/id/ … 011.tar.gz
http://search.cpan.org/CPAN/authors/id/ … 011.tar.gz

anyone got info why this is happening? Many thanks.

Last edited by krull (2008-10-27 17:27:23)

krull wrote:

I am getting that perl error that log2g is getting. funplug 0.5... pretty weird.

Code:

/mnt/HD_a2/ffp/tmp/BackupPC-3.1.0 # perl configure.pl

Error loading BackupPC::Lib: Bareword "compareLOGName" not allowed while "strict subs" in use at lib/
Compilation failed in require at (eval 20) line 2.
BEGIN failed--compilation aborted at (eval 20) line 2.

BackupPC cannot load the package BackupPC::Lib, which is included in the
BackupPC distribution.  This probably means you did not cd to the
unpacked BackupPC distribution before running configure.pl, eg:

    cd BackupPC-3.1.0
    ./configure.pl

Please try again.

/mnt/HD_a2/ffp/tmp/BackupPC-3.1.0 #

Me, too.  And I am definitely running it from the correct directory.  I have firmware 1.05, fonz's funplug 0.5, with all packages in the "packages" directory and the perl package from the "extra-packages" directory, along with the perl modules mentioned in the howto.  But the BackupPC configure script craps out right at the beginning.  I would *love* to get this working, but I am a Linux novice and know no perl at all.  If anyone here has any suggestions, I would be most grateful for the help.

Hello everyone,

I don't seem to get Backuppc working on my CH3SNAS. What i've done is followed these steps from: http://dns323.kood.org/forum/t3227-Back … npkg.html.

But i'm stuck at the rsync perl module. How did you compile it to the DNS-323/CH3SNAS? or is there another way to get it working. I would like to get it working on the CH3SNAS side. Here's where it went wrong:

I was trying to use the make command when i got these errors, haven't attempted further commands yet.

the error i've added

Thanks PlaneTeeR

Last edited by PlaneTeeR (2008-12-01 13:55:39)

---

Attachments:
error, Size: 34,085 bytes, Downloads: 567

dilettanti wrote:

puterboy wrote:

You need to make the following edit:
Remove the parentheses in the line in Lib.pm so it looks like:
return sort compareLOGName @files

That was it - thanks!

Your welcome

dilettanti wrote:

Now I just need to figure out how to get it to run.  I tried setting it up to run as a different user - I guess I could just have it run under root, but the howto suggests running under a dedicated user, and I don't know how to do that...  I created a user 'backuppc' and specified that user during the configuration, but I got the following error:

Error: Wrong user: my userid is 0, instead of 1000(backuppc)

This script needs to run as the user specified in $Conf{BackupPCUser}, which is set to backuppc.

This is an installation problem. If you are using mod_perl then it appears that Apache is not running as user backuppc. If you are not using mod_perl, then most like setuid is not working properly on BackupPC_Admin. Check the permissions on /mnt/HD_a2/www/pages/cgi-bin/BackupPC_Admin and look at the documentation.

You need to run as user backuppc. Either log in as user backuppc or 'su' (switch user) to backuppc or do what I do which is to create backuppc as a non-login account by 'sudo' to it.
I run all my BackuPPC individual programs as: sudo -u backuppc <command>

dilettanti wrote:

So I tried to switch back to running as root, and I am now getting the following error:

Bareword "HostSortCompare" not allowed while "strict subs" in use at /mnt/HD_a2/ffp/usr/BackupPC/bin/BackupPC line 1635.
Execution of /mnt/HD_a2/ffp/usr/BackupPC/bin/BackupPC aborted due to compilation errors.

Line 1635, in case anyone is interested, is:

Code:

foreach my $host ( sort(HostSortCompare keys(%$Hosts)) ) {

I would assume this would have the same solution as the error I previously helped you with -- it looks like the same code structure and it is the same error message -- you are allowed to play with the code and try to figure out and fix some things yourself...

I don't know if anyone else is having trouble with this, but I keep getting:


"Error: Only privileged users can view information about host "

When trying to load a host. I've created the backuppc user, have lighttpd running as that user, have confirmed that backuppc perl script will run with that user, however there is no dropdown in my main screen, and when I search for my host in the Hosts search box, it finds it, but shows the above error.

I've also added a line to the lighttpd that is supposed to add the REMOTE_USER information that the script requires.

Ideas?

Could someone outline for me the advantages of using BackupPC over using rsnapshot+cron on the backup-server and an rsync daemon on the backup-client?     I'm having a hard time figuring out whether it's useful for me to try.

Thanks for the info on setting up BackupPC.

I believe I have everything installed and setup correctly, however I get the following error (in the Admin page):

Error: Can't find IP address for machine

machine is a DHCP host, and I don't know its IP address. I checked the netbios name of 192.168.0.93, and found that that machine is not machine.

Until I see machine at a particular DHCP address, you can only start this request from the client machine itself.

"machine" is the name of my laptop running WinXP, and is defined in the /ffp/etc/BackupPC/hosts file as a DHCP host.  It's also defined in Computer->Properties->Computer Name ... full computer name: machine

What commands can I try to troubleshoot trying to connect to my laptop from the DNS-323?

Last edited by profm2 (2009-10-07 07:04:43)

Marijom wrote:

Any progress with the File-RsyncP-0.68

/mnt/HD_a2/ffp/tmp/BackupPC/File-RsyncP-0.68 # make
...
...
distcc gcc -c   [... etc]
distcc: No such file or directory
make[1]: *** [Digest.o] Error 127
... ...

Marijom: I have the exact same problem. I think it's neccessary to install the GNU C compiler, using the distcc package. Have you done it? I'm trying to do it. Please report
GailH

-> Update: I have installed distcc-3.0-1 and gcc-4.1-2 packges. I am trying to do a "make" on File::RsyncP. The "make" fails with the first error: cannot link to 127.0.0.1. I then go:
disccd -a 127.0.0.1
and then I do the "make".
Then the gcc compiler gives a huge amount of error messages: it can't find the "include" files.

-> Update 30 9 2011: I had to install binutils, kernel-headers, bison and several other packages.
Also, in the "make " command, it's good to add: "CC=gcc CCX=g++", in order to bypass distcc. Compilation now works.

Last edited by GailH (2011-09-30 10:45:42)