DSM-G600, DNS-3xx and NSA-220 Hack Forum

helpmhost · 2009-06-10 09:28:36

Hi,

I was following: http://dns323.kood.org/howto:bettersamba (the part How to Make the DNS-323 Work with UNC Paths)

I saved the config using firefox. I made the change (without typo) using a text editor that only uses LF. And then I put it back in using firefox. It then rebooted. After the reboot, the web interface never comes up. The device still works though. I can connect to the shared drives over SMB. I can still SSH to the device.

When I SSH to the device, I do a netstat, and I notice that it is not listening on port 80 or 443 which tells me it isn't loading the web server. I run dmesg and there are no errors that I can see.

Any ideas? If I knew how, I would try to manually start the web server, but I don't.

As for the firmware, not sure, it was the newest one back in march-ish.

Another thing, since the change, every time I reboot, one of the drives lights flashes (blue) really fast for about 5 minutes after booting. It then goes back to normal and only flashes upon activity.

Thanks for the help.

luusac · 2009-06-10 12:25:48

possibly a corrupted config file. to start the webserver from the console enter /web/webs &
is the light flashing not normal behaviour (though 5 minutes does sound rather long)

helpmhost · 2009-06-10 20:05:20

Hi Thanks for the reply.

I ran the script you mentioned and this is what it outputs:

Code:

/web/ddns.conf:2: no such option '-----------------------------168072824752491622650073--'
Segmentation fault

The content of that entire file is:

Code:

-----------------------------168072824752491622650073--

It had the ^M at the end of both lines, so I removed them and it still does the same thing.

I still have an original untouched copy of my CfgBackup. Is there a way I can re-import that now without the web interface?

Or can someone give me the contents of their ddns.conf so I can put that in?

Thanks

mig · 2009-06-10 20:43:00

helpmhost wrote:
Or can someone give me the contents of their ddns.conf so I can put that in?

It's not quite that easy. There is a copy of ddns.conf in the NVRAM which is corrupted. Take a look at this
thread http://dns323.kood.org/forum/viewtopic. … 445#p13445 for a solution.

Last edited by mig (2009-06-10 20:45:36)

helpmhost · 2009-06-10 20:46:24

Thanks for the help. It is working now.

DSM-G600, DNS-3xx and NSA-220 Hack Forum

Announcement

#1 2009-06-10 09:28:36

The web server is not loading

#2 2009-06-10 12:25:48

Re: The web server is not loading

#3 2009-06-10 20:05:20

Re: The web server is not loading

Code:

Code:

#4 2009-06-10 20:43:00

Re: The web server is not loading

helpmhost wrote:

#5 2009-06-10 20:46:24

Re: The web server is not loading

Board footer